China Touch-Safe Air Industrial Space Heater Ntl 152 150W for Electrical Components

Touch-Safe Heater (Semiconductor)
Touch-Safe air industrial space Heater NTL 152 150W for Electrical Components
• Low surface temperature
• Quick mounting due to clip fixing
• Double insulated (plastic)
• Wide voltage range
• Small size
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater NTL 152. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation.

Technical Data CE RoHS ISO9001 Patent

NTL 152

Operating voltage

120-260V AC/DC¹ (min. 110V, max. 265V)

Heating element

PTC resistor - temperature limiting

Surface temperature

< +80°C (+176°F), except upper protective grille

Connection

4-pole terminal 2.5mm², torque 0.8Nm max.

Casing

plastic according to UL94 V-0, black

Mounting

clip for 35mm DIN rail, EN 60715

Fitting position

vertical airflow (air outlet up, connection on bottom)

Operating/Storage temperature

-45 to +70°C (-49 to +158°F)

Operating/Storage humidity

max. 90% RH (non-condensing)

Protection type/Protection class

IP20 / II (double insulated)

Note

other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Examples of connection
² ambient temperature - see Heating capacity / Ambient temperature diagram;
³ measured 50mm above protective grille