TRAILER TYPE CORE DRILLING RIG
Series spindle type core drilling rigs are mounted on trailer with four hydraulic jacks, self-erect mast by hydraulic control, which are mainly used for core drilling, soil investigation, small water well and diamond bit drilling.
MAIN FEATURE:
Compact size and light weight of mechanical transmission, large diameter of rotating, unit's spindle, long distance of support span and good rigidity, hexagonal Kelly ensure the torque transfer.
The trailer is equipped with radial tyres, and four hydraulic supporting jacks, which is used for leveling the drill before working and strength the stability of rig.
The hydraulic mast is composed of main mast and mast extension, which greatly improve working efficiency, and are very easy for transportation and operation. Compared with common core drilling rig, trailer type core drilling rigs have put off heavy derrick and save cost.
With high and optimum rotating speed, the rig can meet various requirement of small diameter diamond drilling, large diameter carbide drilling and all kinds of the engineering hole drilling.
During the feeding process, the hydraulic system could adjust the feeding speed and pressure to meet requirements of drilling in various stratums.
A bottom-hole pressure gauge is equipped to monitor the drilling pressure.
Automobile type transmission and clutch is equipped to achieve good commonality and easy maintenance.
Centralized control panel makes operation convenient.
The octagonal structure spindle is more suitable to transmission in large torque.
Specifications of trailer geological core drilling rig
Fundamental parameters UnitXYT-200XYT-2BXYT-3BDrilling depthm280300600Drilling diameter mm60-38080-52075-800Rod diameter mm5050/6050 60Drilling angle°0-9070-9070-90Overall dimension mm4460x1890x22504460x1890x22505000x2200x2300Rig weight kg332033204120Skid // Rotation unit Spindle speed Co-rotationr/min88, 197, 296, 399, 655, 888, 70,146,179,267,370,450,677,1145,75,135,160,280,355,495,615,1030,Reverse rotationr/min66, 147 70, 155 64,160Spindle strokemm510550550Spindle pulling forceKN496868Spindle feeding force KN294646Maximum output torque N.m170025503500Hoist Lifting speed m/s0.31, 0.72, 1.060.64,1.33, 2.440.31,0.62,1.18,2.0Lifting capacity KN2025, 15, 7.530Cable diameter mm121515Drum diameter mm170200264Brake diameter mm296350460Brake band width mm607490frame moving device frame moving stroke mm420420420Distance away from holemm250300300Hydraulic oil pump Type YBC12-125 (left)CB-25CBW-E320Rated flow L/min184040Rated pressure Mpa1088Rated rotation speedr/min2500Power unit Diesel engine Type L28N485QCZ4102Rated power KW2024.635.3Rated speed r/min220018002000