China Transformer Comprehensive Characteristics Test Bench Lab Equipment

I.Product Description:
HZHT-208 transformer comprehensive characteristics test console conform to the state standard GB/T4776, GB/T5169, GB/4285.It is mainly used for load and no-load characteristics testing of power transformer, distribution transformer, also can do power frequency voltage withstand and double frequency inductance, partial discharge tests. The measuring parts of this device is controlled by high performance single clip microcomputer, no-load and load test data are sampled by it to avoid the error caused by voltmeter, ammeter, watt meter separately reading and manual calculation in traditional test methods.
II.Product Features:
1.Large screen backlight LCD display, operation and display are clear classified, easy to operate.
2.Can do DC resistance test of 50kVA to 100000kVA power transformer, ratio group test, no-load loss test, on load loss test, AC withstand voltage test, inductance withstand voltage test .
3Voltage, current digital display meter or pointer meter can be read directly, loss, ratio, DC resistance test results can be print and download.
4.Withstand voltage test over-current, alarm with sound and light, timing.
III.Product Parameters:
1.Measure and control no-load test, on-load test, power frequency test, double frequency test of 10kV, 35kV, 110kV, 220kV, and transformer capacity less than 20000kV.
2.Measure and monitor parts: input three phase voltage monitor meter(digital display), input current monitor meter(digital display), output voltage monitor meter(digital display), power frequency test voltage measuring meter(digital display), power frequency test current measuring meter(digital display), double frequency test voltage measuring meter(digital display), double frequency test current measuring meter(digital display).
3.Operation parts: switch function of test items, control of input and output voltage, control of load and no load test current shift, control of voltage regulator voltage step-up and step-down.
4.Protection parts: load and no load test over-current protection, power frequency test over-current protection, double frequency test over-current protection.
5.Power source type: three phase four wires.
6.Current transformer parts: use two same model 0.05 level current transformers which are various gears.
IV. Company Information
Wuhan Hezhong Electrical Equipment Manufacture Co., Ltd founded in 2002, reorganized by electrical test equipment factory of former Wuhan high voltage research institute, is a high quality equipment supplier of China State Grid. After years of continuous innovation has become as a professional production and sale electric power testing, test equipment of high-tech enterprise integrates the ability to scientific research, development, production and sales, service, with kinds of patents, its core technology is in the same industry leading lever, and cooperates with the research institutes of Tsinghua University, Peking University and Chiao Tung University. Our sales and service are all over the country and exported to America and Europe, southeast Asia markets such as USA, Singapore and other overseas markets.
1.Electrical Technology, Security Experts: with 15-years experience in manufacture of Surge(lighting) Arrest(3Kv-36Kv gap, gap-less), Intelligent Contact Withstand Voltage Test Device, DC High Voltage Generator, Ultra-low Frequency Voltage Generator, Cable Fault Tester, Automatic Loop Resistance Tester, Intelligent Large Current Generator, Microcomputer Relay Protection Tester, DC Resistance Tester, Transformer Turns Ratio Tester, Insulation Oil Withstand Voltage Tester, High Voltage Switch Mechanical Characteristics Tester, Transformer Dielectric Loss Tester, Standard Voltage Divider, Intelligent Touch Insulated Boots (Gloves) Withstand Voltage Testing Device, Partial Discharge Test System, Transformer Comprehensive Test Table and other power test, test equipment.
2.Stable and reliable quality: manufacturing process is strictly complied with ISO 9001.
3.Payment terms: TT, L/C
4.High-efficiency production: samples delivery time is within 7 days, mass production leading time is 20-30 days, it also depends on your order quantity.
5.OEM service, can provide a complete set of solution for customer's different test requirements.