China Turning Lathe for Steel Round Bar

Turning Lathe for Steel Round Bar


Series WXC Peeling Lathe Machine is a high-efficiency lathe which is specialized in processing the surface of steel round bar and steel wire rod, for example, straightening, peeling, cutting and polishing, etc.
Not only quickly remove surface hardened layer, cracks and other defects, but also can get high precision.
During processing, the bar doesn't rotate itself. The cutting tools rotates at high speed to peel the surface of the bar. At the same time, after peeled , the bar keeps walking forward.
Shapes of Workpiece are requested long steel round bar and steel wire rod.
SpecificationWXC80C (semi-automatic type)Black bar requiredDiameter Range (mm)Φ20~Φ80Length Range(mm)2500~6000Yield Strength σb (Mpa)≤1100Surface Hardness≤HB320Straightness≤1.5‰Diameter Toleranceaccording to GB 702-2004 second groupRoundness(mm)≤50% of diameter toleranceSurface Roughness (Ra)≤25~50μmAfter peelingDiameter Range (mm)Φ19~Φ77.5Diameter Cutting Depth (mm)1.0~2.5 (minimum cutting depth depends on the ovality of the raw material) Diameter Toleranceh10-h9Surface Roughness (Ra)6.3-3.2μmFeeding Speed (m/min) stepless speed1.0~10.0(it should be slowed down if the bar is continuous chips, with high strength, high hardness, larger diameter or smaller diameter, larger or smaller cutting depth)Cutter Head Rotational Speed(rpm) 430~1200 (stepless speed)Main Motor (kw)75Voltage380VFrequency50HZTotal Capacity(kw)95(approximately)Dimension of main machine (L x W x H)5.1m x 3.3m x 2.2m Dimension (loader&unloader included) (L x W x H)32.5m x 6.0m x 2.2mWeight (T) - Main Machine 8.5 (for reference)Compressed air (prepared by user)0.5~0.8MPa,1.8m³/min, more than 0.8 m³ air storage tank with two stage oil water separator and Compressed Air Refrigeration Drier