China Turnstile Turnstile Gate Flap Turnstile

Brushless DC Motor Passage Access Control Flap Barrier Turnstile

1. Standard Specification:

Dimension

1200*300*980mm (Standard)

Stainless Steel

#304

Power Supply

AC110V±10V,60Hz / AC220V±10V,50Hz

Passing Speed

40 persons/min (normal open)
30 persons/min (normal close)

Response Time

1s

Communication Interface

TCP/IP

Operating Temperature

-15°C ~ 50°C

Related Humility

<=95%

Package

Plywood Box

Gross Weight

Approx. 70KG

Automatic reset time after failure:

Opening and closing time

Infrared Sensor

Thickness

2. Parameters:

1. Standard product features:

1) It haInverter s fault self-test and alarm prompt function, which is convenient for users to maintain and use;

2) The operating state of the programmable device through the built-in small push panel on the main control board;

3) Anti-pinch and anti-collision function, when the resistance is blocked during the swing arm reset, the motor will automatically stop working within the specified time. After the default delay, it will be reset again (until reset), and the force is very small (≤2Kg );

4) Anti-shock function, the swing arm is automatically locked when no open signal is received;

5) The swing arm is synchronously adjustable (for double swing);

6) With automatic reset function, the system will automatically cancel the user's permission for the passage when the switch is not open within the specified time;

7) Freely adBeauty Equipment justable normally open or normally closed to meet the requirements ofElectronics Stocks different venues;

8) It can be connected with a vaShaft riety of card reading devices to receive relay switch signals;

9) One-way and two-way pendulum function, which can control the entry and exit of personnel in one direction or two directions;

10) Remote control and management can be realized directly through the management computer;

11) Delay automatic reset, the system defaults to 10 seconds (adjustable) automatic reset after turning on;

12) The pCable Tools ower-off swing arm is automatically opened and automatically closed when it is powered, which meets the fire protection requirements.

3. Optional features:

1) Sound and light alarm functions, including illegal intrusion alarm, anti-pinch alarm, etc.;

2) Counting function;

3) Infrared reset function;

4) The chassis is lengthened, the swing arm is lengthened, and so on.

4. Main structure and configuration

SUS304 standard case

Stainless steel swing arm

Turnstile control PCB

Direction indicator board

Power supply

Motor

Movement and transmission part 1 set

Infrared sensor 3 pairs

5.Other products

6.Pakaging

7.Successfully Case