China Two Cavity Semi-Automatic Blowing Mould Moulding Machine for 5L Oil Bottle

Specification of D-R502 Two Cavity Semi-automatic blow moulding machine

Model: D-R502
1. Description:
No.Name UnitQuantity1.2cavity 5L semi-automatic blow moulding machine(include 1set 5L bottle mould)
set12.high pressure air compressor 1.6/30kg
set13.high pressure air tank 0.6/30kg

set14.air dryer 2m³ /30kg
set15.air filter
pc3
2. Features:
2.1 D-R502 Stretch Blow Molding Machine is suitable to produce different shapes of PET/PP bottles/jars as well as PMMA globes(neck size below 100mm). It is applicable for blowing bottles from 5L(2cavity) to 10L(1cavity) and is widely used to produce mineral water, carbonated drink, juice, medicine, cosmetic and oil bottles etc.
2.2 The machine adopts advanced microcomputer control system with stable property.
2.3 The machine adopts infrared pre-heat system with powerful penetrating power. It ensures PET preforms be heated evenly and quickly by rotation.
2.4 The width and height of lamp and baffle board in heating system are adjustable which could fit the preforms with different structures to heat. And the heating system also has automatic cooling device to ensure the constant temperatures of heating tunnel.
2.5 Every mechanical action of blowing machine has fool-proof. If one workstage breaks down, the procedure of machine will switch to safe state automatically.
2.6 Every mechanical action of blowing machine is droved by oil pump, so the machine has advantages such as non-pollution, low noise etc.
2.7 The design of gas circuit divides actions and blowing to three steps and which could meet the needs of blowing and actions with different pressure.
2.8 The blowing machine has strong mould clamping force which adopts high pressure and hyperbolic arm linkage to clamp the mould.
2.9 The safer and more reliable design of valve location makes the gas circuit better.
2.10 The blowing machine has fully automatic production processes which have advantages such as low investment, high efficiency, easy operation, simple maintenance, safe system etc.
2.11 The rejection rate of bottle is less than 0.2% and the bottom of bottle is non-pollution.
Besides, the cooling system of machine is also best.
3.0 Specification
NameItemUnitPET-5L-2 material/PETProducts
volumeL 5L(2cavity);
10L(1cavity)outputpcs/h 800-1000maximum height
mm550maximum diametermm350(2-Cavity)maximum outer diameter of bottle
mm110Auxiliary equipmentsoperating pressure of high pressureM3/Mpa KW≤4.0/35air consumption of high pressureL/m³8operating pressure of low pressureM3/Mpa KW≤2.0/10air consumption of low pressureL/m³2.0air freezer dryerM3/Mpa KW≥3.0/30air filterM3/Mpa≥3.0/30high pressure air tankM3/Mpa ≥1.0/30pressure of water chillerMpa0.3-0.5temperature of water chillerºC10-12flow of water chillerL/m³45Voltage
voltage/HZ(Three-phase)V/HZ220-380/50-60specification of equipmentsmeasure of main machineM2.2*0.9*1.95weight of main machineKG1500measure of ovenM2.2*0.7*1.45weight of ovenKGS600security assuranceAutomatic fault alarm
4. Pictures of D-R502
5. about us:
Taizhou Doria Plastic Equipment Co., Ltd. is located the town of plastic products and mould in China, which is one manufacturer owns special production teams, advanced production equipments and rich production experience.
The main products are following: Automatic & semi-automatic blow moulding machine, PET preform, plastic injection machine, preform moulds, bottle moulds, commodity moulds and correlative products.
We have good market in South America, Africa, Asia, Europe, North America, and our many customers from Canada, Brazil, Thailand, Chile, Algeria etc.
Meanwhile, the output of our main product automatic 5gallon blow moulding machine could achieve 600pcs/h which is the breakthrough of our company.
Welcome everyone to visit us; we hope we will have good chance to cooperate!
6. Location:
No.362 Lingxiage Village
Xicheng Street, Huangyan
Taizhou, Zhejiang
China
7. Contact us:
Tel: +86 15267630381
+86 15867055081