China Two Component Sealant Coating Machine

ST02 Two component Sealant Extruder:
Features:
1. It is composed of raw material pump, solidification pharmaceutical
Pump, proportional pump, sealant-mixture system, hydraulic pressure system, electric system and so on.
2. Raw material pump, solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the materials can be supported equivalently in two-way. The raw material pump is compelled by the hydraulic pressure system while the solidification pharmaceutical pump is compelled by the pneumatic motor.
3. There are high-pressure valves in the underpart entrance of solidification
Pneumatical filter and material-feeding place of the mixing device and one-way valve is set in the mixing device so as to prevent two-components from fleeing each other.
4. Rising and falling system is controlled by hand valve and the proportion of the two-components can be changed by adjusting the slipper in the swinging pole. Tightening the nut once the demanding scale is reached.
Technical data
Mixing ration proportion of mixture: 6: 1-14: 1
Raw material barrel: 55Gallon(200L)
Solidification pharmaceutical barrel: 5Gallon(20L)
Max. Air-consumption volume: 0.5m3/min
Max. Squeeze pressure: 20Mpa
Air source pressure: 0.5-0.8Mpa
Machine size: 1200x1200x1850mm
Weight(about): 500kgs
Guarantee & Aftersales service:
1)Guarantee the complete machine for 18 months, except the consumable
Parts.
2) 24hour technical support by email or calling.
3) User-friendly English manual for machine using and maintaining.
Contact information:
Jinan Sunny Machinery Co., Ltd.
Office tel: 0086-531-66683398/66683798
Mobile: +86 18005318120
Website: www.jnsunshine.com