China Two-Component Silicone Screen Printing Ink Oil Based for Clothing Printing

Two-component Silicone Screen Printing Ink Oil based For Clothing Printing characteristics and uses

This seried of products are two-component addition-molded liquid silicone rubber,which has excellent weather resistance,good dimensional stability,moderate hardness,good fluidity,high transparency,non-toxic and environmental protection,and adhesion to various textile fabrics.Good,heat resistance can be above 250°C.

Use method:

•Mixing:The rubber material and the curing agent are mixed in a weight ratio of 10:1(the glue will increase the amount of curing agent will slow down the curing speed).The mixing can be performed manually or by using a stirring device.

•Defoaming:The mixed rubber should be degassed under vacuum before making a label or printing a trademark on the fabric.Under vacuum,the volume of the rubber compound can increase 4 to 5 times.Therefore,the defoaming container should be 4 to 5 times larger than the rubber compound volume.After a few minutes,the rubber compound volume returns to normal.When no bubbles escape on the surface(about Ten minutes)is the end of defoaming,and it can be carried out in a vacuum dryer when using a small amount.

•Molding:After defoaming,the glue can be dispensed or scraped.The glue can be injected into the mold and heated to form.

Certificate

Packaging, storage and transportation and precautions
• The base rubber in this series is packed in 20kg / per iron can.
• This series of products should be stored in a dry, ventilated and cool place to prevent rain and sunlight.
• Avoid contact with condensation type silicone rubber curing agents during operation. Also likely to cause the compound to not solidify are amines, sulfur and phosphorus compounds, and some metal salts. Avoid moisture ingress during use.
• The storage period of this series of products is one year, and the fluidity can be restored under the action of shearing force (strong stirring). It is recommended that the rubber material be stirred in a container first, and then added with a curing agent and stirred evenly. It can still be used after passing the retest.
Lead Time :

Quantity(Kilograms)1 - 200>200Est. Time(days)3To be negotiated

about us
When I choose a product,I want to know the manufacturer of the product to verify that my product is of high quality.So I also prepared our information for you, so you can choose us with confidence.

Main product
In addition to the main products, our materials can also be used as raw materials for many products, such as cables, cosmetic molds, mechanical supplies, waterproof supplies.

If you have other needs, you can contact me first to inquire whether our silicone can meet your needs. demand

FAQ