China Two Zones Css Furnace for Rapid Thermal Processing Upto 5" Dia Wafer at Max. 800c

Two Zones CSS Furnace for Rapid Thermal Processing upto 5" Dia Wafer at Max.800°C - OTF-1200X-RTP-II-5
Introduction
OTF-1200X-RTP-II is a two heating zone rapid thermal processing furnace with 11" I.D.quartz tube.
It is designed for PVD or CSS (Close Spaced Sublimation) film coating up to 3" diameter or 2"x2" square. The furnace is heated by two group of halogen heaters (Top and Bottom) separately with max. 20ºC/s heating rate. Two 30 segment precision temperature controllers are built in with +/-1ºC accuracy. RS485 port and control software are included to allow for the operation of furnace and temperature profile logging via PC. It is excellent tool to research new generation thin film for solar cell, such as CdTe, Sufide and Perovskite solar cell

Specification:

Furnace structure
Vacuum Chamber

Furnace, two temperature controllers, two channel gas flow meters are integrated into a mobile aluminum alloy frame
The chamber is made of high purity fused quartz tube
Quartz tube size: 11" OD/10.8" ID x 9" H
The vacuum flanges are made of Stainless Steel 316Vacuum FlangesTop Flange with one KFD-25 vacuum port and one gas outlet (1/4" pipe required) can slide up or down manually to load and unload substrate and evaporated material easily
Bottom flange has one KFD-25 vacuum port with one gas inlet (1/4" pipe required) with needle valves
Flange is sealed by double silicone o-rings and can achieve max. vacuum pressure of 10E-2 Torr by a quality mechanical pump and 10E-5 Torr by molecular pump
One digital vacuum gauge is installed on the top flange.
Precision annti-corrosion digital vacuum gauge is optional at extra cost ( Pic. 2)Gas Flow Meters

Gas mixer integrated with two float-meters with adjustable measurement ranges of:
16 -160 mL/m
500 - 5000 mL/m (for purging purpose) Heater and
Sample Holder

Two independently controlled heaters with manually adjustable gap from 2 - 30 mm
20 pcs Halogen lamps are used as heating element for rapid thermal processing.
Heaters are is made of stainless steel with water cold jacket to reduce heat radiation and allow for fast cooling.
5" dia. circular wafer holder is built into top heater for holding substrate.
One set of high thermal-conductive AlN plates (5" Dia. x 0.5mm Thick) are included (place on the back of substrate to make it heat uniformly).
A 16L/min recirculating water chiller is included for saving water source Temperature ControllerTwo precision digital temperature controllers with 30 segments programmable offer independent controlling of top and bottom heaters
Each controller has PID auto tune function to protect heaters from overshooting and alarm function to avoid overheating and thermal couple broken
PC communication interface & software is installed for (click picture below for details) recording temperature profile shown as belowWorking TemperatureMax. temperature for each heaters: <= 800ºC
Max. temperature difference between two heaters: <= 300ºC depends on spacing between two heaters:
Spacing 30mm
Max. temp difference: 315ºC @ heating bottom onlyHeating &Cooling RateHeating: > 8ºC/s ( heating single heater only )
Cooling: > 10ºC/s (600 - 100ºC) Max.Thermal CoupleTwo K-type thermal couples are installed on top and bottom heaters separatelyWorking Voltage208 - 240VAC, single phase, 20A air breakerPower Requirement2200W total ( 1100W for each heater )WarrantyOne year limited with life time supportDimensions1085mm L x 680mm W x 1710mm H

Factory
Zhengzhou CY Scientific Instrument Co., Ltd is mainly engaged in the research and development, design, manufacturing and sales of equipment used in scientific researches. Independence and innovation is the company's tenet.Our main products include: tube furnace, muffle furnace, plasma cleaner, vacuum furnace, atmosphere furnace,CVD system and customized lab equipment.Welcome you come to visit us.
Exhibition