China UHMW-PE Piers Dock Fender Upe Panel Marine Pad Vrigin Plastic Dock Protection UHMWPE Fender Pads

Type of plate:
Conventional type, flame retardant type, high temperature resistant type, conductive type, antistatic type, weather resistant type, dual color type, antistatic flame retardant type (double resistance type), high lubrication type, high strength type, high hardness type.
II. Plate type:
1. Economical type: 6 million yuan
2. 8.4 million for standard type
3. 9.2 million for high-end type
Sheet properties
1. Physical properties:
Density: 930 kg/m³
Elongation stress F (150/10) : 0.41MPa
Characteristic viscosity: 2400 ml/g
Viscosity: 2400 cm³/g
2, mechanical properties:
Tensile modulus (1mm/min) : 640MPa
Tensile stress at yield (50mm/min) : 17MPa
Tensile strain at yield (50mm/min) :20%
Wear resistance test of mortar (based on GUR 4120=100) :80
Ball hardness 30sec value: 35N/mm²
3, thermal performance:
DTUL@1.8Mpa: 42 ºC
DTUL@0.45Mpa: 65 ºC
VEKA softening temperature B50 (50ºC/h 50N) : 80 ºC
Paper thermal expansion coefficient (PARALLEL) : 2 E-4/ºC
Flammability @1.6mm nom.thickn: Hb class
Test Baidu (1.6) : 1.6mm
Thermal conductivity at 23 ° C: 0.41 W/ (mK)
Specific heat at 23ºC : 1.84 kJ (kg-K)
4. Electrical performance:
Relative dielectric constant -100Hz: 2.1-
Relative dielectric constant -1MHz: 3 -
The dielectric loss Angle -100Hz: 4E-4
The dielectric loss Angle -1MHz: 01E-4
Volume resistance: >1E12 Ohm*m
Surface resistance: >1E12 Ohm
Insulation strength: 45 kV /mm
5, processing conditions powder
6. Test the processing conditions of splines
Mold pressing molding mold temperature: 210 ºC
Cooling speed of molding die: 15K/min
Advantages and characteristics of UHMW-PE plate
1. With self-lubrication performance, when the transmission line is dry, so that high-speed transmission is possible
2. Very low coefficient of friction
3. Reduce the tension of the chain board
4. Reduce noise
5. Prolong the life of the chain board, without causing damage and scratch to the chain board
6. Reduce energy loss
Introduction to the comprehensive performance of plate:
Ultra-high molecular weight polyethylene (UHMW-PE) is a linear polyethylene with an average molecular weight of more than 1.5 million. UHMW-PE because of its very high molecular weight (ordinary polyethylene for 20-300,000), with ordinary polyethylene and other engineering plastics incomparable comprehensive performance:
1) High wear resistance, 4 times higher than nylon 66 and polytetrafluoroethylene, 6 times higher than carbon steel, is currently the best among all synthetic resins.
2) The impact strength is very high, which is twice that of polycarbonate and five times that of ABS, and it can maintain high toughness at liquid nitrogen temperature (-196ºC).
3) good self-lubrication, its self-lubrication is comparable to PTFE, friction coefficient is only 0.07-0.11; only 1/3-1/4 of the friction coefficient of steel.
4) The impact energy absorption value is the highest among all plastics, and the noise reduction effect is very good.
5) high chemical stability, in a certain temperature and concentration range can resist the action of a variety of corrosive media and organic media.
6) Extremely strong adhesion resistance, second only to "plastic king" polytetrafluoroethylene.
7) completely healthy non-toxic, can be used to contact food and medicine.
8) The density is the smallest among all engineering plastics, 56% lighter than PTFE, 22% lighter than polycarbonate; 1/8 of the density of steel, and so on
Plate is introduced
Our company uses the molecular weight of more than 5 million raw materials production, due to the above excellent comprehensive performance, UHMW-PE is called by the European countries "amazing plastic" and attention, in many industries have been widely used.
The board production line of our company adopts three-station design, and the cooling time is more than twice that of other manufacturers, which effectively guarantees the flatness and dimensional stability of the board.
The production pressure of our equipment can be up to 1200 tons/square meter to meet the requirements of raw materials to the equipment, so that it can give play to the performance of raw materials.
All our products use imported raw materials, toner and additives are high-grade brand, product quality in the forefront of the industry.
The panel produced by our company is mirror effect, good flatness, no deformation, and the thickness tolerance can be controlled within <±0.3mm.
All our products use imported raw materials, toner and additives are high-grade brand, product quality in the forefront of the industry.
Our company production of plate can be used in the coal plate, ultrahigh molecular polyethylene, as coal plate, play its abrasion resistance and self-lubricating properties, avoid the use of traditional materials easily blocked, disrupting production, increase the production cost, prolong the service life of coal, reduces the labor intensity of workers, social benefit and economic benefit is accidentally read is very significant. Can be used in vehicle plate, the use of ultra-high molecular weight polyethylene modified delivery of geotechnical dump truck carriage and viscous materials such as coal train car, solve the problem of the adhesion and wear, transporting wet clay basic is not binding, carrying sand will not impact rupture, wear is very mild, compared to the original steel car more wear-resisting, prolong the service life and good effect. Also can be used in the coast guard, ultra-high molecular weight polyethylene sheeting has light weight, shock resistance, wear resistance, corrosion resistance, uv resistance, ageing resistance, the advantages of small friction coefficient, the impact strength is 20 times of PVF, nylon 66 10 times, eight times that of the ptfe, wide applicability, and can be used as a ship anti-collision device, low reaction force, little surface pressure, can reasonable absorption, rolling and pitching of ship berthing strong adaptability, easy installation and maintenance. And our plate ice plate can also be used for simulation, the simulation of ice plate made full use of ultra-high molecular weight polyethylene of low friction coefficient, the advantage of self-lubricating, compared with the real ice ice field, ultra-high molecular weight polyethylene for the construction and operation cost is low, simulation ice has not restricted by environment and season, energy conservation, environmental protection, easy to use, easy to tear open outfit advantage.