China Ultraviolet Laser Marking Machine for Glass Acrylic Marking

ULTRAVIOLET LASER MARKING MACHINE
HBS-ZG-3
Technical Parameter
Model HBS-ZG-3 HBS-ZG-5
Laser Wavelength 355nm 266nm
Laser Power 3w /5w
Marking Area 50x50mm/100x100mm
Marking Speed ≤7000mm/s
Beam Quality <2
Q Frequency Tuning 8Khz-15Khz
Min. Line Width 0.01mm
Min. Character Size 0.2mm
Repetition Accuracy ±0.003mm
Power Consumption 2kw
Power Supply 220V/ Single-Phase/50Hz/10A

Product Introduction
Ultraviolet Laser Marking Machine is self-developed by HBS and has the world's most advanced technology. It has following features: high electro-optical conversion rate, long working time of nonlinear crystal, high stability, high positioning accuracy, high operation efficiency, optimized modular design for convenient installation and maintenance. Equipped with two-dimensional automated workstation, it can realize marking continuously in multi-stage or large-size marking. The laser marking line is very fine that suitable for marking with high demand, it's mainly applied to mark the products such as LCD screen, IC wafer and IC chips.

Applicable Materials & Industry
Mainly used in the marking and surface processing of materials such as of all sorts of glass, TFT, LCD screen, Plasma screen, textile products, ceramic chip, mono-crystal silicon wafer, IC chip, sapphire and thin polymer film. The main advantage of Ultraviolet laser is in the complementing of the shortcoming of other bandwidth lasers in precision machining and processing of special materials.