China Underground Water RO Water Treatment

Underground Water RO Water Treatment

Machine description
Tap water→ booster pump→ sand filter→ carbon filter→5µs security filter→ high pressure pump→ one stage RO system→ well water
This RO ro water treatment plant price system is developed on the basis of tap water quality in Guangzhou, China. The process is as follows: The Raw water pump add pressure and pump water into sand filter which contains quartz sands which are used to remove the suspensions, colloids, rust, impurities in water as well as some microbes (such as red worm) →carbon filter which contains high quality first class fruit shell active carbons which are used to remove the organics in water as well as oxygen, bad odor, pesticide and colloids which are not removed thoroughly by sand filter→water softener, which is used to reduce the water hardness by exchange magnesian ion and calcium ion in water through cation resin so as to remove the state of calcium and magnesium ions→security filter which installed two pieces of 5µm PP filter (length 500mm) which are used to remove the impurities(diameter above 5µm). The previous procedure is called pretreatment of RO device which is mainly used to pretreatment for the raw water and ensure RO system work well and prolong the lifespan. After the process of pretreatment, high pressure pump pumped the water into one stage RO system. This system adopt two pcs 4040 membranes which are American DOW membrane., the unit desalination rate is 99%, the whole system desalination rate is 97%-99%(capacity 500L/H well water) under the condition of tap water quality in Guangzhou, the purified water can reach the state drinking water standard in China. (TDS ≤10µs/cm), Recovery rate is 65%, more or less. Equipped with stainless steel zwitterions combined bed will ensure water quality reach 1µs/cm.


two stainless steel 304 (PVC) barrels attached American auto device
Equipped with booster pumps, stopped automatically when there is no water besides it will add pressure when low pressure.
One pcs 5µs security filter.
High pressure pump. imported solenoid valve. imported DOW membrane.
Two stage RO systems equipped with 1000L stainless steel storage tank
Pressure protection device imported from Korea which used to protect the high pressure pump.
Membrane automatic rinse as the machine is operated, digital time control
Adopt UPVC or Stainless steel (optional) pipe to ensure never leak, the maximum pressure of membrane is 1.8Mpa.
Pipes automatically feeding water as they lack water and stop automatically when water is full.
Raw water conductivity. well water conductivity automatic digital display.
Well water quality reach state 99GB drinking water standards in China.

II:TECHNICAL SPECIFICATIONS

MoldeMZH-ROTypeVertical cylinderFiltrating layer height1000mmWorking pressure ≤0.8MpaFlux 200l Dia300mmFiltrating MediaQuartz sand height 600mmMaterial glass steel barrel

Machinery Main Parts
Our Factory
The Main Project
After Sale Service
1. Warranty time: One year guaranteed for quality, product whole life service any damage except the wrong operation during warranty. Period is repaired freely, But the travel and hotel expenses should be count on buyer.
2. Commissioning services: The product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3. Traning Services: Our engineers will train your staff in your factory or video to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4. Manintenance Services: Any malfunction happened, once you inquiry us, We will reply you within 24 hours.
5. The File: The manual specification, report of the material which used to the equipment and other documents video related to GMP authentication information will be provided by us.

FAQ
1. Q: Are you factory or trading company?
A: We are the professional manufacture of cosmetic machinery in China more than 10years.
2. Q: Where is your location?
A: Company and Showroom located in Guangzhou china, Factory located in Jiangsu and Shanghai
Province.
3. Q: Are your engineer be able to serve in oversea?
A: Yes, we have a lot of experience install the machine in oversea.
4. Q: What is your material of your product?
A: adopt with full stainless steel 304-2b and 316L
5. Q: How does your factory do regarding quality control?
A: Two years spare parts,and full-life service of our machinery.
Our Company to customer satisfaction for the development of three goals: Product quality, Product technology and After-sales service.