China Unitfine Mesh Belt Tunnel Dryer for Puff Food Corn Flakes

Description:
This machine is a continuous penetrating flow drying equipment applied for drying pieces strip and particle state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of traditional Chinese medicine, and others, for which the water contents are high and high drying temperature is not high. The machine owns the advantages, of fast drying speed, high evaporation capacity, and good product quality, The de-watered filtered cake state paste material should be made into particles or strips before drying process.

Features:The amount of air, heating temperature, time of material stay on the belt, and velocity of feeding material can be adjusted in order to obtain the best drying effect.Equipment's configuration is very flexible. It can use the netlike belt washing system and cooling raw material systemHot air can be circularly applied, the energy is greatly saved.Unique air dividing device, it makes hot air distribute uniformly; this can guarantee products'quality.Heating sources can be selected from steam, conducting heat oil, electricity, coal furnace, and oil burner. Principle:
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer. The dryer is composed of several sections For each section, the hot air is circulated separately. Part of exhausted gas is exhausted by a special
moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with, material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring water away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously.
Models Available:
Type
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
DW-2-20
Quantity of unit
4
5
4
5
4
5
10
Belt width(m)
1.2
1.6
2
Length of drying section(m)
8
10
8
10
8
10
20
Thickness of raw material(mm)
≤60
Operation temperature(°C)
50-140
Steam pressure(MPa)
0.2-0.8
Steam consume(kg/h)
120-300
150-375
150-375
170-470
180-500
225-600
450-1200
Drying time(h)
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
0.5-3
Drying strength(kg/h)
60-160
80-220
75-220
95-250
100-260
120-300
240-600
Power equipped(kw)
11.4
13.6
11.4
13.6
14.7
15.8
36.8
Overall dimensions
L(m)
9.56
11.56
9.56
11.56
9.56
11.56
21.56
W(m)
1.49
1.49
1.9
1.9
2.32
2.32
2.32
H(m)
2.3
2.3
2.4
2.4
2.5
2.5
2.5
weight(kg)
4500
5600
5300
6400
6200
7500
140Application
DW series multilayer belt dryers are extensively used for dehydrating and drying the sheet type, stripe type and granular materials in the industries of food, agricultural products, dehydrated vegetables, Chinese medicinal materials, seafood, native products, feed, and chemical materials.