China Universal Joint U Joint Steering Universal Joints Drive Shaft Knuckle Eye Flexible Universal Joint

The product description

According to the requirements of the use occasion, the choice of different manufacturing process of precision universal joint, can save the cost.

1) there is a rolling cost connection structure, and the axle sleeve is not heat treated. It is suitable for low rotating speed occasions, with the rotating speed ≤500rpm;

2) the rivet is riveted and connected with a cross pin and a short pin rivet. The shaft sleeve is subjected to quenching heat treatment and the speed is ≤1000rpm;

3) there is a connection mode of needle roller bearing. After tempering and heat treatment, the shaft sleeve can be injected with oil to extend its service life, with the speed ≤4000rpm;

4) the cross shaft and the long and short pins are made of high-strength alloy steel after heat treatment;

5) the maximum swing Angle of the universal joint can reach 45°. It is usually recommended to use it within 30° to extend the service life;

6) the surface can be blackened, galvanized, nickel-plated, chrome-plated, or without any surface treatment;

7) YonOPO products can be manufactured according to the requirements of samples or customer drawings.