China Used Tire Cutting Machine Rubber Car Tire Cutting Machine

Used Tire Cutting Machine/Rubber Car Tire Cutting Machine (Whole Tires To Tire Blocks)
1. Product Description
Tire circle cutter--tire strip cutter--tire blocks cutter--Rubber blocks.

2. Specification
2.1
Tire circle cutting machine is an alone accessory machine, it puts the tire which is greater than 650 type (both nylon and steel wire) flat on the machine, locking tire inside opening through up and down locking system, then putting alloy tools to target to the place of disintegration of tire to cut off the mouth and nation of tire, finished in 3 minutes. The power is 4kw; revolting speech is 40r/min, Shape dimension: 1.8m*1.3m*1.6m.
QQJ-40 Tire Circle Cutter (to remove the bead wire)Motor power4 KW+0.75KWCapacity40pcs/hWork range∮650-1250 mm L*W*H1.8m*1.3m*1.6mWeight650 kg
2.2
Tire strip cutting machine make use of two round special cutting tools to combination running cutting. It can cut the tire of circle cutting into 3-5cm wide strip, to use for dicer cutting. The material of this machine's knife disk is special alloy structural steel (scientific name: Nine-chrome-silicon), diameter of knife disk isΦ390mm, hardness is 58-62GrS, more durable. With the hand grinding wheel cast when not sharp, power is 4kw, revolting speech is 45r/min, shape dimension: 1.3m*0.8m*1.65m.

QTJ-390 Tire Strip Cutter (to cut tires into strip)Motor power 5.5 KWCapacity1000kg/hMotor speed45r/minL*W*H1.3m*0.8m*1.65mWeight850 kgSpecification of cutting strip3-8cm wide strip
2.3
Tire block cutting machine is prepared for the crush of host machine, Not only it makes the cutting strip-type waste rubber cut into about 3*5cm small pieces, but also can enter into host machine again through mutual use between sword and fixed knife, convenient to feed, high output and won't damage roller easily, power is 5.5kw, revolting speech is 380r/min,shape dimension: 1m*0.8m*1.4m. To pay attention to the space between sword knife and fixed knife when the machine is in operation, best to keep at around 0.1mm, so that the steel wire can be cut off.

QKJ-358 Tire Slice Cutter (to cut tire strip into tire block)Technical parameterCommon type Motor power5.5 KWCapacity800kg/hSpecification of cutting slice3*5*8cmL*W*H1.0*0.8*1.4mWeight800 kg
3. End Products
4. Company Profile