China VMC1000P high speed Non-counterweight Metal milling VMC machining center

VMC1000P Non-counterweight CNC machining center.

Main Specification for VMC1000P
SpecificationVMC1000PWorktable Worktable size(LxW)520x1200mmT-slot (NxWx D)5x18x100mmTravel X/Y/Z axis travel1000/520/535mmMachine range Distance from spindle center to column582mmDistance from spindle nose to worktable surface80-615mmSpindle Spindle taperBT40Spindle power11/15kwMax.spindle speed8000/10000rpmFeed(direct drive) Max.feed speed10m/minRapid feed speed(X/Y/Z)48/48/32m/minBall screw(diameter+lead) X/Y/Z axis ball screw4016Tool magazine Tool magazine capacity24tTool change time(T-T)2.5sPositioning accuracy(National standard) Positioning accuracy(X/Y/Z)±0.008mmRe-positioning accuracy(X/Y/Z)±0.005mmMachine dimension LxWxH2600x2355x2800Machine weight Max.loading of worktable500kgsMachine weight5800kgsGuarantee Terms:
Complete service by free of charge within 13 months after B/L date Technical service will be given forever at any time. Any questions during operation, can contact us freely by email, or contact on line by Skype, WhatsApp, etc. Also can talk face to face during fairs. You will get response within 20 hours.
Detailed Pics. for VMC1000P
1. One-piece bed, C-shaped structure, Z-axis without counterweight; Ø The whole machine is 5.5 tons, the fixed parts are heavy-weight design, and the moving parts are light-weight design;
2. Reinforced rib structure design, light weight, while improving rigidity;
3. Self-made bed, Okuma pentahedron machining equipment, gray cast iron, artificial aging in the factory;
4. Assembly line, manual scraping of the bonding surface;
5. 8 feet, the whole surface is attached, the new model is redesigned-three-point contact;
6. The sheet metal is 2mm, and it is assembled by double-sided fastening to reduce the possibility of seam water seepage.
ØThe contact ratio of headstock and column is improved ,Improve the rigidity of the spindle box during processing
ØThe span between the column and the bed is improved,The column tilt is the lowest during processing
ØLabyrinth protection design,Avoid the entry of iron filings and cutting fluid
Screw type: Ball Brand: PMI/THK/HIWIN, accuracy class C3; Specification: 4016; Installation form: fixed-fixed; Designed rapid traverse speed: 48m/48m/32m;
1. Coupling type: diaphragm Brand: Miki;
2. Bearing Brand: NTN; Type: Angular Contact Thrust Ball Bearing; Specification: 3062; Arrangement: Top Three
3. Guide rail: linear rail (ball); specification: 35/45/45; brand: THK/PMI/HIWIN; number of sliders: 2/single rail.
4. Screw bearing lubrication method: adopts thin oil lubrication method to improve the content: 1) improve heat dissipation efficiency; 2) grease is not easy to replace; 3) mixed corrosion of water, oil, and grease; 4) different requirements for lubricating viscosity.
Spindle adopts: Taiwan ROYAL/VYUCHENG/KENTURN,
Standard 8000 revolutions, optional 10000 revolutions;
1. Belt drive, dynamic balance on the factory V1 line; Ø Standard BT40 tool holder, optional BBT40 tool holder;
2. The spindle adopts high rigidity and short nose design;
3. Increased axial rigidity, heavy cutting, reduced vibration of circumferential milling tools, and improved machining quality;
4. The main shaft adopts the ring spray mode, and the central water outlet main shaft is optional;
1. Taiwan POJU/OKADA, disc manipulator tool magazine, 24T; Ø According to customer needs, we will choose tool magazine with protection device;
2. The force of the tool magazine directly reaches the base, and the column does not bear the lateral bending force;
3. The tool change mechanism is equipped with an air tank to ensure sufficient air pressure for one tool change;
1. Side-discharge water tank, front flushing, high-pressure water gun design, shorten the cleaning auxiliary time and reduce labor costs.
2. Improve the oil-water treatment structure to extend the life of the cutting fluid and reduce the cost of auxiliary materials.