China Vacuum Heating Treatment Insulation Oil Purification System 9000lph

Vacuum Heating Treatment Insulation Oil Purification System 9000LPH
Application:
REXON OVacuum Heating Treatment Insulation Oil Purification System 9000LPH, High Vacuum transformer oil treatment is mainly used for removing trace water, gas and impurities from insulating oil.
This equipment is mainly used for removing trace water, gas and impurities from insulating oil, improving the insulating oil performance index. It is mainly applied to purification of 110KV,220KV,500KV,750KV,1000KV power transmission equipment insulating oil.
Also it applied to treat low viscosity oils, like insulating oil, turbine oil, and hydraulic oil in the transmission equipment which is lower than 110KV.
Meanwhile, Series ZYD oil purifier can be used as independent vacuum source with functions of vacuum drying and vacuum filling.
Insulating oil performance mainly decided by oil's water content, If the water is not saturation in the oil, it appears as the molecular states; If the water is saturation in the oil, it appears as the liquid states and stay at the bottom of container.
Under the vacuum states, because the less gas content, the water and gas in the oil will be escaped from the oil and evacuated by the vacuum pump.
The higher vacuum value(Close to 0 Pa),the higher speed of water molecular volatilization(The latest technology, the vacuum oil purifier can reach to 1 Pa working vacuum value).
The gas and water which dissolved in the oil will become degassed and exhausted by vacuum pump.

The oil temperature affects vacuum oil purifier working efficiency, the higher temperature, the water molecular get more kinetic energy, so it is higher diffused speed of water molecular.
But, exorbitant temperature will cause fracture of carbon chain for oil molecular, if that will make oil bad.
So we don't suggest the oil temperature excess 80°C. Also the impurity will affect oil dielectric strength, so the vacuum oil purifier requires high filtration precision.
Advantages:
Vacuum Heating Treatment Insulation Oil Purification System 9000LPH, degas and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
The oil technical data after treatment:
1. Gas content is less than 0.1%
2. Impurity size is less than 1μm without free carbon
3. Water content is less than 3 part per million
3. Oil dielectric strength (breakdown voltage) is more than 75KV
4. Acidity value is less than 0.01 mg KOH/g
5. Dielectric loss factors at 90ºC is less than 0.001
Oil technical data after REXON Series ZYD oil purifier machine treatment:
A. Gas content is less than 0.1%
B. Impurity degree is less than 1μm without free carbon
C. Oil dielectric strength (breakdown voltage) is more than 75KV
D. Water content is less than 3 ppm(part per million)
E. Acidity value is less than 0.01 mgKOH/g
F. Dielectric loss factors at 90ºC is less than 0.001
G. Cleanliness degree is less than NAS 1638 Grade 5
Technical Parameters

ParametersUnitZYD-30ZYD-50ZYD-100ZYD-150ZYD-200ZYD-250ZYD-300Flow RateL/H1800300060009000120001500018000Working VacuumMpa-0.08 ~-0.099Working PressureMpa≤ 0.3Temp RangeºC20 ~80Power Supply 380V, 50Hz, 3Phase( As per required)Working NoiseDb60 - 80 (Depended on the configuation)Heating PowerKW306090135150165180Total PowerKW3567.5101.5149164 198Inlet/Outlet DiamMM25324250506060WeightKG450550750950120018502000SizeLengthMM1450145017501850195020502150WidthMM950100012501300135014001450HeightMM1700175019502000205021002150AFTER TREATMENTDielectric StrengthKV≥ 75-85Water ContentPPM≤ 3Gas Content%≤ 0.1Particle Sizeμ≤ 3Cleanliness ≤NAS 1638 Grade 5

Spare Parts:
Packing & Delivery

Factory View
We are the leading manufacture near 20 years experience and supply best quality and highest cost performance oil purification machines. Our oil purifier equipment are built by high quality raw materials with newest advanced technology by many skilled technicians and professional workers. We are honest to every customer and responsible for every machine we sold, we offer great after sales service, anytime when customer need us, no matter before or after purchase, we are available online or calling, to make a fast and instant response to customer.
Customer Visit
onsite Project
The REXON Multi-Function Transformer Oil Filtration Machine is an oil processing equipment designed to treat used transformer oil and give it a new life. The machine has the function of dehydrating, degassing, purifying, filtering and regenerating the transformer oil. Therefore, the moisture, gas and impurity contaminants in the transformer oil will be removed after being purified by our transformer oil filter.
We practiced in this industry during all these years, and have rich on-site experiences too. Any on-site cases, please contact us for a solution. For detailed product specifications, please leave us your email or mobile no. to send you the catalogs and all details. Sincerely hope to cooperate wtih you soon!