China Vacuum Jetting Truck

Our brand jetting acuum suction sewage truck
is mainly applied to various types of urban underground sewage pipes clean and clear, and can be used for pumping water wells sewage, sludge and large lumps, transport, handling,
Highlights the versatility and user-friendly design concepts, product is fully functional, elegant, and easy to operate. Sludge tank from 8,000 Liters to 16,000 Liters.
The product uses FAW, DFAC-DONG FENG, SHACMAN, SINOTRUK, FOTON, JAC, CAMC, SAIC-Iveco, NORTH Benz(BEI BEN), HYUNDAI China, Nissan UD China, HINO China, ISUZU China 6 x 4 chassis, safety, comfort, economy and so reached the top international level.

ShapeCylindrical shaped tank with external reinforce rings.MaterialMild steel.Capacity .8,000Lilters sludge tank. 3,000Liters water tank.Shell thickness6mm.Dish end thickness6mm.Working pressure-0.9bar underpressure.Tank inner filterSeparate the sucked wastewater and solid, which protects key parts like pump, valve and hose.
Tipping cylinderItaly PENTA brand front tipping and single acting cylinder. Front tank bottom mounted with safety support for protectionLiquid level indicatorMounted at the rear of the tank.Overpressure safetyOverpressure relief valve on tank top.Full opening rear lidHydraulically opening and lockingOutlet ValveOne 150mm ball valve, manual operation.Anti over-flowSS float ball prevents overfilling sludge tank.
When the tank's full, ultrasonic level indicator is activated and vacuum pump is closed automatically, allow no need to shut down from the Cab.Reverse dischargePressure switch system changes positive pressure to be negative, which allows the tank inside wastewater be reversed discharged via suction boom. This improves working efficiency.Vacuum Unit
Vacuum pumpLiquid ring vacuum pump, is driven from the PTO on the
gearbox, provides high airflows along with high vacuum levels for removing materials above or below liquid surfaces.
Engaged and disengaged from drivers cab.BrandKENFLO
Max vacuum level-0.92BarAir flow rate2800m3/h.Power requirement90kW.Rotate speedMax 800r/min.Pump coolingCooling Water tank in mild steel 1,500L, mounted behind cabPump protection1)stainless steel ball valve in the tanker;2)filter;3)auto vacuum check valve.Telescopic suction boomStainless steel material. 270°horizontal rotation and 1350mm extension, 6m working radius. Vertical lift up to 6m from ground
Power Take Off
The PTO (OMSI brand) is mounted to the transmission
l 1 driving window for driving the vacuum pump
l 1 driving window for driving the water pump
l 2 driving windows for driving all the hydraulic devices
High Pressure Jetting Unit
Pressure pump brandURACA

Flow 290L/Min
Max Pressure200bar
Power requirement 135kW
Pressure hose100m, ID25mm(1″). The pressure hose with pneumatic water pressure regulation device, can be connected to the air supply system of the truck to blow out all water in case of temperatures below 0°.
Hose reel Rear mounted, with 110° horizontal rotation.
Jetting hose be placed into pipeline via hose guide frame. And can be collected back hydraulicly .



Suction Hose
Length20m, can be lengthened
ID 5″
Material steel line and rubber hose
Accessory 5″ non-return valves

Jetting Hose
Length100m, can be lengthened
ID 5″
Material steel line and rubber hose

Nozzle
1 jetting nozzle, 1 pointed nozzle

Optional super drilling head: Made by wear-resistant materials and equipped with drill, cut tree root and concrete waste, specially designed for completely blocked sewer.

Finishing
Hose carrierTool box on each side . Length according to available place.Side hose reelWith a capacity of up to 20m of 1/2″ hose.Hand-Gun cleaner50 L/Min flow rate, 110bar.
Hydraulic equipments
EquipmentAll needed control valves and equipment for a smooth and easy operation of the unit are installed.HydraulicThe unit is equipped with a suitable oil tank.
Hydraulic order for rear lid opening, tank tipping, suction boom telescoping, lifting and rotation.Additional safety features
Emergency stopAn emergency stop is installed on the main control panel.Working light1 working light is equipped on the right side of the truck.
Control panel
All necessary controls needed for good operation are provided and will be discussed with the customer prior to mounting, including control panel and radio remote control.

Painting
SandblastingAll steel parts are sand blasted before painting.PaintTwo components anti corrosion primer and final painting at customer's choice of color.InsideThe inside of the tank is specially treated against rust.AdvertisingPaint markers according to customer's demand.

Delivery
DateIn mutual agreement.ManualWe provide operation and complete maintenance manual in English language.Training3days free operate training.