China Vapor Pressure Tester ASTM D 323

Purpose:
PT-D323-8017 Vapor Pressure Tester (Reid Method) is designed and made as per ASTM D 323 standard and National Standard GB/T 8017 "Test Methods for Vapor Pressure of Petroleum Products (Reid Methods)" and. It is suitable to determine vapor pressure of gasoline, volatile petroleum and other volatile petroleum products.

Main technical features
1. Floor type structure. Stainless steel working table. It is good looking and easy to operate. Accessories are complete.
2. Digital temperature controller. The temperature in water bath is uniform. Temperature control accuracy is high. It can meet the requirements of test.
3. Two precise pressure meters to detect the gas pressure inside the bomb.
4. Two sets of vapor pressure bombs. It can do synchronous tests.

Technical parameters
1. Power supply: AC 220V±10%, 50Hz;
2. Heating power of water bath: 1600 W;
3. Operation temperature of water bath: room temperature~90°C;
4. Temperature controlling accuracy: ±0.1°C;
5. Pressure meter accuracy: ±0.4%;
6. Ambient temperature: -10 ~ 35 °C;
7. Relative humidity: ≤85%;
8. Total power consumption: not more than 1700 W;
9. Dimensions (m): 0.55*0.52*1.02

Standard Accessories

No.ItemUnitQutyRemarks1Water bath and temperature control deviceSet1 2Single opening pressure bombSet2 3Pressure gauge, 0 MPa~0.1 MPaPiece2Suitable for Reid vapor pressure (20.0~75.0)kPa4Mercury thermometer 0ºC~50 ºC, sale division is 0.1 ºCPiece1 5Screw valve with outer screw thread (for sealing air chamber)Piece2 6Screw cap with inner screw thread (for sealing gasoline chamber)Piece2 7Small gasket (outer diameter Φ14.5mm, inner diameter Φ8mm)Piece4 8Sealing ring for pressure meter (outer diameter Φ18mm, inner diameter Φ6mm)Piece4 98# Rubber stopperPiece1 10Stopping ring for thermometer (1#)Piece2 1110 A fuse (Φ5x20)Piece2