China Volt-Ampere Meter Ampere Meter Voltmeter

Measurement instrument voltmeter aManufacturing Equipment for Electrical & Electroni mmeter three clamp digital phase volt-ampere meter
Introduction:
HYG-230 three-phase intelligent phase voltammeter is a multi-function intelligent instrument specially designed for field test. The meter can simultaneously measure three-phase AC voltage, current, voltage between phases, phase between currents, phase between voltage and current, frequency, phase sequence, active power, reactive power, apparent power, and without the open circuit of the circuit under test. Power factor, current vector sum, discriminate transformer wiring group, inductive, capacitive circuit, test secondary circuit and busbar protection system, read the phase relationship between differential protection CT, check the wiring of the meter correctly Whether or not to repair line equipment, etc., provide a safe, accurate and convenient smart meter for electricity inspectors. Applicable to electric power, petrochemical, metallurgy, railway, meteorology, industrial and mining enterprises, research institutes, measurement departments, etc. Especially suitable for energy billing systems and relay protection systems.
ParametersItem NO.HYG-230NameThree clamp digital phase volt-ampere meterPower SupplyDC 3.7V large capacity rechargeable lithium battery; USB charging interface; continuously work for about 10 hours when fully chargedRated Currentabout 150mADisplay3.5 inch color LCDSize196*92*54mmClamp Sizeφ7.5*13mmSampling Rateabout 3 times/secondMeasurement RangeAC Voltage: 0.00V~600VAC Current: 0.0mA~20APhase: 0.0°~360°Frequency: 45.00Hz~Breaker & Protector 65.00HzActive power: 0.0W~12kWReactive power: 0.0W~12kVARApparent power: 0.0W~12kVAPower factor: -1~+1Sealing & Gaskets Sum of current vectors: 0mA~60.0AResolutionAC Voltage: AC 0.01VAC Current: AC 0.1mAPhase: 0.1°Frequency: 0.01HzActive power: 0.1WReactive power: 0.1VARApparent power: 0.1VAPower factor: 0.001Sum of current vectors: 1mAAccuracy
(reference condition)Voltage: ±(0.5% measurement range)Current: ±(0.5% measurement range)Phase: ±1° (note: phase error under operating conditions: 10mA~20A is±3°; below 10mA is ±6°)Active power: ±(1.0% measurement range)Reactive power: ±(1.0% measurement range)Apparent power: ±(1.0% measurement range)Frequency: ±(1.0% measurement range)Power factor: ±0.03Phase SequenceNormal phase: U1, U2, U3 or I1, I2, I3 theAlarm & Security Systems cursor flashes from left to rightOpposition: U1, U2, U3 or I1, I2, I3 the cursor flashes from left to rightTesting Rateabout 2 seconds/timeData Storage500 setsCharging InterfaceUSB interfaceAuto Power-offAfter starting for about 15 minutes, the meter automatically shuts down to reduce battery consumptionVoltage TestingWhen the battery voltage is lower than 3.2v, the symbol of low battery voltage is displayed to remind the replacement of the batteryWeightThe host: 550g (with battery)Current clamp: 185gx3Tesing wire: 250gTesting Wire Length1.5mCurrent Clamp Wire Length2mWorking Temperature & Humidity-10ºC~40ºC; <80%RhStorage Temperature & Humidity-10ºC~60ºC; <70%RhInput ImpedanceThe test voltage input impedance is 1MΩVoltage WithstandingThe sinusoidal ac voltage of 1000V/50Hz between the instrument circuit and the enclosure was tolerated for 1 minuteInsulation Strength≥100MΩ between instrument circuit and jacket housingStructureDouble insulation, with insulation vibration jacketSuitable SafetyIEC61010-1 CAT 3600V; IEC61010-031; IEC61326; pollution degree 2ConditionsReference ConditionsWorking ConditionsNotesAmbient Temperature23ºC±1ºC-10ºC~40ºC/Ambient Humidity40%~60%<80%/Signal WaveformSine waveSine waveβ=0.01Signal Frequency50HZ±1HZ45HZ~65HZ/Working Voltage3.7V±0.1V3.7V±0.5V/Measure the amplitude of phase current1A±0.1A1mA~20.0A/Measure the amplitude of phase voltage100V±10V10V~600V/Current amplitLeather Machinery ude when measuring power factor1A±0.1A10mA~20A/Voltage amplitude when measuring power factor100V±10V10V~600V/External electric field, magnetic fieldshould avoidPosition of the measured wireThe measured conductor is located at the approximate geometric center of the clamp
Features:
1. The host adopts 3.5-inch true color LCD screen, graphical menu interface display, vector diagram indication.
2. The current clamp integrated handle design is easy to operate and is ideal for places with dense wiring.Product Display:
Related Products:
Company:
FAQ:
1. How long is your warranty period?
--- One year warranty.2. What is your delivery time and customized product?
--- For regular products, the delivery time is 3-10 days.
--- For customized product, the delivery time is over 20 days.3. What after-sales service do you offer?
--- We can offer you four after-sales services: telephone service, accessory replacement service, depot repair service and door-to-door service.
(Cost price is needed if you want to buy more equipment accessories. You should bear the labor cost and overseas trip expenses if you ask door-to-door service.)4. Do you provide the overseas technical support?
--- Yes, we do. We have offices in Malaysia, Indonesia and Tanzania.5. Any certificates for your product?
--- We have certification and factory inspection report. Third-party measurement report is also available but with extra cost.6. What is your minimum order quantity?
--- 1set.7. What's your payment term?
--- T/T 60% deposit and 40% balance before delivery
--- 100% deposit once confirm PI.8. What trade terms are available?
--- FOB and CIF.Package:
Contact: