China Vtc-200p Vacuum Spin Coater

Anti-Corrosion Spin Coater ( 8000 RPM & 6" wafer Max.) with Complete Accessories - VTC-200P
Model:VTC-200P Anti-Corrosion Spin CoaterBrief Introduction: VTC-200P is Anti-Corrosion Spin Coater made of Polypropylene (PP) material, which can be used for strong acidic or alkali solution, especially suitable for use inside glovebox under Ar gas.Four vacuum chucks are included for coating wafer from 10 mm to 6". Digital control box is separated from spin coater which allow you operate in the remote location. The spinning speed is variable from 500-8000 rpm with two programmable segments. The package includes the oilless vacuum pump and 20ml syringe for immediate use. Product Usage:Coat liquid and sol-gel on the substrate StructureCase and spin disk made of Polypropylene (PP) to resist most of the corrosive solutions.Digital control box is separated from spin coater.One filter is included in standard package. It is used to connect the pump and coater for preventing waste water from flowing into the pump.One oil-less vacuum pump is included in the standard package Input PowerDefault 220VAC, 50/60Hz, single phase, 1000W Max.110V is available in optional bar ( with 1500W transformer )A power socket on the back of the Digital control box is used to supply power for the vacuum pump. (The output voltage of this power socket depends on the input voltage of the spin coater, e.g. if the spin coater is plugged into AC 110V, this power socket will supply AC 110V.) Chamber &Vacuum ChuckChamber diameter: 150 mm4 sets of PP anti-corrosive vacuum chucks with different sizes ( Φ21mm,Φ38mm,Φ60mm,Φ100mm ), which can hold substrate from 10mm Dia to 6" Dia. If your sample < 10 mm, please order rubber cup from us at extra cost ( click picture below right ) Spin SpeedDigital control panel with two programmable segments of different spin times and speeds500 - 8000 RPM adjustable spinning speed at each segment Liquid Injecting20mL syringe is included to contain the coating material. (see the first picture below)Optional: You may choose Precision Electronic Single Channel Pipette: 20 - 200uL for more accurate coatingUsing plasma cleaner to treat substrate surface before coating can improve film qualityYou may consider our new product: Heatable syringe Product DimensionsSpin Coater: 25.2cm(Φ) x 41cm(H)Digital controller: 23cm(L) x32cm(W) x16cm(H) WarrantyOne year limited with lifetime supportRusting and damage due to improper storage condition or maintenance are not covered by warranty Motor 24VDC, Brushless, 200W max.: Net Weight 25 kg Compliance CE CertifiedShipping Dimensions 40"(L) x 30"(W) x 30"(H) Shipping Weight 46 kg (100 lbs)
More Information




Contact Person: Ichuka Lang