China Walk-behind Concrete trowel machine with gasoline engine driven

Walk-behind Concrete trowel machine with gasoline engine driven
Cement Finisher is a gasoline engine drives the spatula rotor, the rotor cross in the middle of the floor with a spatula. Spatula tilt direction and the rotor rotate in the same direction, the gasoline engine drives the v belt make the spatula rotor rotation. When operating, dozen catch fire, first hold control handle, two push is moving forward together, together in the future is to move back. An hour can do an average of 100 ~ 300 m2, compared with manual finishing can improve the work efficiency more than 30 times.
Method of use:
1, Start the finishing machine, hand operation
2, Hold a joystick, keep body balance
3, Keep balance to adjust the direction when working on the floor, or machine will be out of control
4, First coarse grinding, then grinding. Mill at the bottom of the coarse grinding, such as the take out when the ground is suitable for fine grinding mill, with a spatula fine grinding
It is a kind of concrete surface coarse and fine finishing machines. Through construction machine surface more smooth, more than the surface of the artificial construction, can greatly improve the compactness of concrete surface and wear resistance, and a manual operation to improve work efficiency in efficiency more than 10 times. Surface finishing machine can be widely used in high standard workshop, warehouse, parking lot, square, airports and frame type buildings on the surface of the concrete slurry, smoothing and finishing. It is the preferred tool in concrete construction.
Main date :
ModelVD-800VD-1000Power3.5HP gas engine5.5HP gas engineWorking diameter800mm1000mmSpeed280r/min 360r/min Paving thickness80mm110mmPaving width800mm1000mmPaving speed8m/min 10m/min Mixing ability2kg3kgWeight85kg95kg
More picture

Stainless steel trowelling plate
stainless steel and Mn steel smear
High-quality Reduction box and gas engine

Multiple models
Package
Our factory