Featured with lightweight but high strength and good flatness, Aluminum honeycomb panel is very suitable and popular for facade envelope and decoration, widely use for interior and exterior decoration of commercial buildings, Gift Box & Bag public buildings like airports, bus or railway stations, subways, tunnels etc.
Aluminum honeycomb panel is a lightweight strong sandwich composite laminated panel, the weight of aluminum honeycomb panel is only 3kg to 10kg per square meter for panel thickness of 6mm to 200mm and the regidity is more than 1.5kN.sqm/m , with prefabrication and assembly of fittings according to framing system, you can easy install the honeycomb panels to the buildings, also very popular for envelope and decoration of interior & exterior walls, partitions, facades, ceiling and canopies. Aluminum honeycomOptical Lens & Instrument b panel or stainless steel honeycomb sandwich panel is the best alternative materials for single aluminum panel or stainless steel panel because of the competitive cost and much lower weight, much better flatness and much higher strength. It's a green and environment-friendly building and decoration material, trending the construction and decoration industry.
SpecificationsHow is a Honeycomb Panel Produced?The honeycomb panel is typically made up of 5 layers by sandwich lamination: facing skin, adhesive, honeycomb core, adhesive and back skin.
Materials with high tensile and compression strength are best suited to being skins, i.e. aluminum, galvanized steel, stainless steel, fiberglass etc.
Adhesive varies widely by application: high strength, high temp, low temp, etc.
Honeycomb Core: A variety of honeycomb cores are available as per design requirements.
FEATURES• Low weight and competitive cost
• High stiffness and strength
• Easy to fabricate and install
• Recyclable
• PVDF cFiltration Equipment & Parts oating or anodized finish aluminum facing skins for good anti-corrosion performance and high resistance.
• Aluminium facing skins are available in a range of thicknesses from 0.5mm to 3.0mm as per design requirements
• Panels can be produced with different aluminum sheet thicknesses on front and back faces and panel thicknesses as per custLED Video Processor om design requirements for weight, strength and installation.
• Aluminum faced panels are chemically cleaned: suitable for painting or the application of decorative laminates
• Brushed and anodised aluminum finishes are also available
• Aluminum honeycomb cell size is 4mm to 8mm as request.
• Wide selection of Joiners &Assembly Accessories are available.
Application
Architectural wall Cladding and decorationArchitectural Rainscreen Facades and canopies envelope.Lightweight interior and exteriorarchitectural panels.Aerospace, Marine & Transport Flooring, ceilings, Walls & PartitionsSilk Screen Printing TabSecurity & Protection les, doors and cabinetsCNC Vacuum basesLightweight Floors, Walls, partitions, canopies, Ceilings, roofs etc.Special Purpose Panel DesignManufacturing ProceduresProjects
Packing and Shipping