China Waste Solid Treatment Medical Waste Incinerator Hospital Waste Treatment

Waste incinerator
LDF series waste incineration installation with the characteristic of small size, high efficiency and reasonable incineration, leading technology, higher harmless degree.
It has best burning performanceon the following waste:
1.Medical waste.(disposable syringes, infusion sets processing, cotton yarn, the operating room, the residual limb, waste rubber gloves, protective clothing and infectious and harm venereal hospital bed supplies, etc)
2.Dead animal body and waste.(all kinds of animal body and waste generated from farms, slaughterhouses, test laboratories,veterinary hospitals, zoos and others ,also as pathological waste.)
3.Industrial waste.(made of plastic, tar, resins, paints textiles fabrics ,the solid waste such as plastic ,PVC, rubber, boards, wood,clothes.)Main Features:
1. The gasifying incineration way is utilizedLean Pipe & Pipe Rack System and the rubbished produced each day is able to handle the one-off incineration treatment.
2. The gasifying incineration, mixed incineration, burn-out treatment and other technologies are used to make the content of the smog exhaust and dust lower than the discharge standard regulated by the nation.
3. Fully seal operation is adopted to be applied to dealing with the infectious medical waste and avoid the secondary pollution.
4. Small volume and site area.
5. The series of incinerator are divided into the fuel and gas kind which can be selected according to the different needs of the users.Main Technical parameters:Model
item
LDF-20LDF-30Anti-Counterfeiting LDF-50
LDF-100LDF-150Radio LDF-300LDF-500Burning Capacity10-20KG/time
3-6 times per day20-30kg/time
(3-6 times per day)30-50kg/ time
(3-6 times per day)50-100kg/time
(3-6 times per day)100-150kg/ time
(3-6 times per day)200-300kg/ time
(3-6 times per day)300-400kg/ time
(3-6 times per day)Size of the Burner (m)(L*H*B)
1.6*1.2*1.7m1.45*0.9*1.751.8*1.15*3
1.8m*1.4m*3.4m2*1.4*3.52.2*1.4*3.83*2*4.8Size of the filling entrance (mm)
380*480480*600620*800
520*720760*960900*11001080*1280Chimney(mm)Ø280(OD)Ø280(OD)Ø280(OD)Ø300(OD)Ø300(OD)Ø400(OD)Ø460(OD)Air-blower
0.25kw0.37kw0.37kw
0.5kw0.5kw1.1kw1.1kw
0.55kwAuxiliary machinePower 0.11kw
oil consumption 4-6kg/hPower 0.11kw
Oil consumption 4-6kg/hPower 0.11kw
Oil consumption 4-10kg/hPower 0.11kw
Oil consumption 4-10kg/hPower 0.11kw
Oil consumption 4-10kg/hPower 0.22kw Oil consumption 7-14kg/hPower 0.22kw Oil consumption 7-14kg/h
Incinerator constitution:
Vertical type furnace body (including feeding door, ash door),first burning chamber, secondary combustion chamber, flue gas purification chamber, secondary combustion chamber, fan, independent chimney, fuel transfer system, blower and air supply system, control system of emergency discharge flue, etc.
Looking forward to your consultation.