China Water Based Acrylic Dry Lamination Adhesive Glue for Paper to Plastic Film

Water based Acrylic Dry Lamination Adhesive glue For Paper to Plastic Film
Basic Info

CharacteristicWater basedCompositionAcrylic EsterColorWhiteShelf Life
6 MonthsPacking50kgs, 200kgs, 1000kgs/Drum

AdvantageSave Glue Usage Compare to Vae GlueAdvantage 2Easy to Chean The Machine After Use The GlueApplication 1BOPP/Pet Film on PaperApplication 2Carton PackingMOQ500kgsTrademarkelite indusOriginChinaHS Code3506919090

Customized GradeSolid Content Can Be Adjusted From 37% to 47%pH Value5.0-7.5Main Agent CompositionAcrylic EsterToxicityNon ToxicFree SampleBelow 400g by Express

Brief introduction:
It is benzene/toluene free water based acrylic polymer emulsion adhesive designed for dry bond /heat seal laminating process.
Dry bond lamination is the process of coating the adhesive to plastic film,
drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..)
via a heat compression nip.
It is mono-component adhesive with very good adhesion to flexible film .
We offer different viscosity adhesive, to meet slow, middle and high speed machine,
it can be used for manual, semi-auto, automatic and high speed full automatic lamination machines.

1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
4, can be use for highest speed automatic dry lamination machine.

TypeSolid content FeaturesTechnical ParameterD1001
D1002
D100337%-42%1, Good surface effect, good brightness and good composite fastness
2, apply for higher speed lamination
3, Less glue consumption, reduce production cost
4, most suitable for common cartons of fruit, food etc... without embossing1, Appearance: white emulsion
2, Viscosity (MPA.S):100-1000
3, PH value: 6.0-8.0
4, Storage: 6 months
5, Toxicity: non toxic
D2001
D2002
D200337%-42%1, Good surface effect, good brightness and good composite fastness
2, apply for higher speed lamination
3, Less glue consumption, reduce production cost
4, most suitable for PET film to paper ... without embossingD3003
D3005
D300742%-47%1, Excellent powder cover ability, and composite fastness
2, High brightness and high speed lamination
3, very good effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc...
4, suitable for double side lamination, gold/silver card paper lamination.D5001
D5002
D5003
37%-42%1, special use for high speed lamination process.
2, lower adhesive consumption, reduce production cost
3, suitable for high speed lamination machine, such as milk box, carton etc.. without embossing process.

Application:
For laminate/bond plastic film like PET, BOPP, MPET to paper, paper board, duplex board.
Suit for manual, Semi-Auto and Automatic machines.
Components: Acrylate copolymer

Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110ºC, the temperature of the drying tunnel to 80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly,
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95ºC, the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film and connections.
Notice:
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5, Better make testing for with film or paper, before mass production, to check the color retention or bonding strength.

Packing & Delivery:
50kgs/drum 200kgs/drum 1000kgs/IBC
20650kgs/1x20'gp without pallet. 16000kgs/1x20'gp with pallet. 20000kgs /1x20'gp.
13500kgs/1x20'gp with pallet.Our Factorty:

Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers
of all kinds ofWater based Laminating Adhesive in the world market.

Our Product were widely used laminate plastic film like PET, BOPP, MPET to paper and exported to more than
30 countries, Such as Syria, Laos,Vietnam,Indonesia,Saudi,Thailand,Cambodia,Malaysia,Philippines,India, Africa etc.

Our production capacity:

Water based lamination adhesive dry glue 15000mts /yearWater based lamination adhesive wet glue15000mts/yearWater based protective film adhesive 3000mts/yearWater based Laser film lamination adhesive3000mts/yearWater based gift box pasting adhesive3000mts/yearwater based sealing adhesive2000mts / year

Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110ºC, the temperature of the drying tunnel to 80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly,
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95ºC, the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film and connections.
Notice:
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5, Better make testing for with film or paper, before mass production, to check the color retention or bonding strength.

Our Company Advantage:

1, Has a professional research center and dozens of R & D team

1)More than 30 modern production bases
2)Profession R&D team, strong R&D ability
3)Advanced research equipment and strong comprehensive strength have laid solid foundation for enterprise's development.

2,And colleges and universities to establish a long-term and stable relations of cooperation
1)The company has introduced the most cutting-edge scientific research achievements
2)At present, it has established long-term and stable cooperation relations with Beijing University of Chemical Technology
3)the company mainly engages in developing water-based environmentally-friendly emulsion-polymerized products

3, Sales service network all over the country, Southeast Asia, to provide you with personal service

1) The company has made remarkable achievements in polymer emulsion materials in domestic market
2) It is highly praised by clients.
3) Meanwhile, the company is positively developing international markets, and our products are exported to
Southeast Asia, European and American markets.
Pls feel free to contact us ,we saaure you of our best service at all times.