China Water Bottle Filling Plant

Full Automatic Water Filling line
We supply complete solution of water bottling plant from A to Z, which includs Water treatment system, Automatic bottle rinsing filling capping machine, Air dryer, Automatic labeling machine, Automatic bottle packaging machine, Automatic palletizer system and the whole factory conveyor system.
3in1 Bottle washing filling capping machine
Modern brand 3in1 washing-filling-capping water filling machine is a set of equipment with high precision and speed to fill liquid. This water filling machine adopts bottle-neck block technology, not only avoiding second pollution to the bottle-neck, but also realizing filling different specs of bottles in one equipment, which greatly improved commonality of this equipment in water filling line.
Production capacity of this machine is from 2000 bottles to 30000 bottles per hour. Main-frame machine adopts frequency controlling electric motor, which is much convenient to adjust speed in scope of production capacity.
The exclusive range of machine is finely known for their operational fluency, low maintenance and friendly to install among others. All are designed and fabricated under the strict watchfulness of experts making use of optimum quality raw material, collected from trusted manufactures of the industry

Model

Heads of
washing filling
sealing

Production
capacity
(bottle/hour)

Suitable
bottle
diameter
(mm)

Spraying
pressure
(kg/cm2)

Main
motor power
(kw)

Overall dimension
(LxWxH)
(mm)

Weight
(kg)

XGF16126

16-12-6

2000-4000

Φ=50-110=170
330-2250ml

2-3

2.2kw

2400x1650x2500

2500

XGF18186

18-18-6

5000-7000

2.2kw

2600x1920x2550

3500

XGF24248

24-24-8

8000-12000

3kw

3100x2300x2800

4500

XGF323210

32-32- 10

12000- 15000

5.5kw

3800x2800x2900

6500

XGF404012

40-40- 12

16000- 20000

7.5kw

4600x2800x2900

8500

XGF505012

50-50- 12

20000- 24000

11kw

5450x3300x2900

9800

XGF606015

60-60-15

25000- 30000

15kw

6500x4500x2900

12800

Bottle Rinsing Part:
The rotary wheel is a fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.

Bottle Filling part:
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Filler is driven through gears inside the machine frame.
link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck

Bottle Capping part:
Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico.
Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only water bottling machine can set the contortion, but also it makes contortion more precise and credible, and reduces inferior. Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism. Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. The capper is equipped with inlet bottle detection switch. Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspecting system is applied to control on-off of elevator.

The Main Machines In The Bottled Water Production Line
Water treatment system( Water purification system) →Bottle blowing machine→ Bottle unscrambler→
Bottle filling machine → Bottle labeling machine → Bottle packaging machine
The Cerificate We got
Service
MODERN MACHINERY offers engineer to assist you in installing your bottling machine. Upon installation of your equipment or line, the engineer stays on-site to watch your new equipment run smoothly and train your operators. Even after our specialist leaves your plant, we are ready to give you timely, courteous service when you need it.
Our engineer offers the following services:
1. Installation of equipment or packaging line at the customer's plant
2. Coordinate schedule with mechanics to perform changeovers and preventive maintenance activities
3. Perform mechanical adjustments (if needed) on equipment and packaging line to optimize equipment's performance
4. Resolve equipment issues
5. Provide on-site training on all assigned procedures
An MODERN MACHINERY engineer will be in-charge of the equipment setup and adjustment in your plant. All of the activities will be focused on optimizing the equipment to maximize production output.

about Us
Zhangjiagang Modern Machinery Co., Ltd. is a professional beverage machinery manufacturer, specializing in water filling machine, carbonated soft drink filling machine(CSD machine) and juice production line, as well as various water treatment plant, sterilizing system, hot filling process. As one of the earliest companies engaged in beverage machinery in China.Our products not only sell well in domestic market, but also are exported to overseas countries including Russia, USA, Czech, Albania, Vietnam, Pakistan, Nigeria, Kenya, Senegal, South Africa and more than 20 different countries.
We would like to cooperate with clients to develop long-term steady business relationships.
Looking forward to hearing from you in the near future. Welcome new and old customers to contact us!
At present, we can provide the following complete sets of production lines:
1. 2,000-25,000b/h mineral water & pure water & drinking water production line
2. 2,000-24,000b/h fruit tea & fruit juice hot filling production line
3. 2,000-20,000b/h carbonated soft drink filling line
4. 100-1200b/h 5&3 gallon water filling line
5. 1000-15000b/h wine & beer bottling line
6. 2000-20000 can filling line
Container loading