China Water Drop Biomass Wood Grinding Hammer Mill for Sale

Water drop biomass wood grinding hammer mill for sale
1. Introduction of wood hammer mill:
wood hammer mill is used to crush materials into smaller and uniformed pieces by the collision between the high-speed hammer and material.
It is more suitable for milling relatively soft raw material like tree branch, cotton stalk, corn stalk, wheat straw, etc. With diameter less than 50mm. After milled, the output size can reach diameter 3-5mm, this is the elementary stage of biomass pellet production.
This grinding machinewe provide can be applied in various aspects. For example, it can
also be used for shredding paper, milling grain, crushing large rock and other waste
management.

Material: wood chips, Cotton stalk/corn stalk/wheat straw, etc.
Pellet size: The diameter of output sawdust is 3-5mm.
Power: Refer to the detailed parameter list.
Capacity: 0.5~6t/h
Gurantee: 2 years.
Application: Grinding wood chips, cotton stalk/corn stalk/wheat straw etc. into sawdust.

2. Why Need A Wood hammer mill?
Massive mechanical pressure is required to make quality wood pellets. You can therefore see that particle size here is a matter of concern. Because big particles will not bond well together with smaller particles. To make sure that the biomass sawdust is more suitable for producing high quality pellets, you should mix wood shaving, straws and grass in the hammer grinder to be ground into sawdust with diameter 3-5mm. When the diameter becomes smaller, it will increase the cohesion forces between the materials thus the finished pellet is both durable and easy to store.

3. Wood hammer mill Working Theory:
Wood Hammer mill is made up of various beaters which rotate at high speed in the grinding chamber.
The raw material is normally fed from the feed inlet and then instantly drops into crushing chamber where they are crushed and compressed by the beaters. Because of the speed and the number of the beaters, the materials can be crushed to fine powder within a short period. You can adjust the clearance between beaters and screens to get different size sawdust.
4. Wood Hammer Mill Features:
1). Simple structure, high efficiency, low power consumption, clean convenient operation, labor and time saving.
2). Adopted blades cutting and high speed airflow impacting, combines the function of double crushing, at the same time, can accomplish material sorting processing.
3). Both coarse and fine grinding can be realized in short time.
4). The right aspiration can make materials go through screen quickly, reducing temperature of grinding chamber and increasing output efficiency.
5). Screen hole size: Ø1.2,Ø1.5,Ø2.0,Ø2.5,Ø3.0,Ø3.5,Ø4.0.
5. Wood Hammer Mill Technical data:

ModelSFSP56*36SFSP56*40 SFSP60*30 SFSP60*38 SFSP60*45 SFSP60*60 SFSP60*75Capacity0.5-1t/h1-1.5t/h0.5-1t/h1-2t/h2-3t/h3-4t/h5-6t/hDiameter of rotor560mm 560mm600mm600mm600mm600mm600mmWidth of chamber360mm400mm300mm380mm450mm600mm750mmHammer QTY202424326488112Speed of rotor2980r/min2980r/min2980r/min2980r/min2980r/min2980r/min2980r/minPower(kw-2P)22/30kw30/37kw18.5/22kw22/37kw45/55kw55/75kw90kw

JLNE Pellet Line Team is waiting for your contact!
Contact: Jennifer

Mobile 0086 13592542350

Web: www.bestpelletmachinery.com