China Water Dryer Air Dryer Oil Dryer

Wind cooling type refrigerationcompressed air dryer (TKD-2NF)Refrigeration type compressed air dryerAdvantages :
1. Compressed air get through the dryer and be cooled by forced, make the water vapor in the air condenses into liquid water and discharge out from the machine taking away the dust and oil impurities at the same time optimized pollutant discharge system.
2. The refrigerantsare air wind fan cooling or water cooling types for option. Wind fan type machine adopt outer rotor wind fan, big windy and low noisy, can use long time. Water cooler adopt low wing copper tube, slowly water flow and many strokes, high heat exchanging rate, low scaling.
3. Adopt filtration type of air and liquid separator, equipped with American HANKISON brand filter elements, much higher separating efficiency than cyclone type separator, separating efficiency can be up to 99.66%.
4. Adopt stainless steel tube and galvanized tube, good acid and alkali corrosion resistance, suitable for food, beverage, medicine fields.
5. Adopt world famous Armstrong brand of foamanti-flaming insulation materials, no air loss, low energy consumption. Working pressure is between 0.3-4.5Mpa, IP54.
6. Single, Integrated, joint control, PC board, frequency conversion or other control circuits type, can meet different users demand.
7.TKDNF series of air inlet temperature under45ºC, TKDHF series of air inlet temperature under80ºC.Technical parameter ofwind cooling type compressed air dryer:
ModelTKD-
1NFTKD-
2NFTKD-
3NFTKD-
6NFTKD-
8NFTKD-
10NFTKD-
12NFTKD-
15NFPost-Press Equipment TKD-
20NFTKD-
30NFTKD-
40NFTKD-
50NFTKD-
60NFItemTKD-
1HFTKD-
2HFTKD-
3HFTKD-
6HFTKD-
8HFTKD-
10HFTKD-
12HFTKD-
15HFTKD-
20HFTKD-
30HFTKD-
40HFTKD-
50HFTKD-
60HFrated air flow capacity (Nm3/min )1.22.43.86.58.510.713.5172335455565working pressure0.6-1.0 (MPa)environment temperature <=38 (ºC)final air dryness(P.D.P)pressure dew point 2-10 ºC ( moisture content 0.6-1.4g/Nm3 )refrigerantR12R22power voltage1 ∮220V3 ∮380Vrefrigeration compressor power (HP)1/311.251.52.83.03.53.657.510.512.515air fan motor power (W)90120180180120*2180*2180*2180*2180*2250*2250*2300*3300*3★180★240★300★300★480★600★600★600★180*4★250*4★250*5★300*6★300*6air intake and outlet pipe dia.G1''G1''ZG1.5''ZG1.5''G2''G2''G2''DN65DN80DN100DN125DN125DN125length (mm)TKDN(H)F600/700700/700820/880880/93011401140/13501140/13501260/14501400/165017501950225022501800220023002300width (mm)450/450450/450520/550550/550690690/700690/700700/800750/900900105012001200900120012001200height (mm)635/915860/950900/10751005/118011001100/13001100/13001320/14501350/160515601630163016801815192023002250net weight
(Kg)45/6070/7590/110115/140225/260260/330260/330330/410400/500780/880820/1050930/11701020
/1260Note : NF stands for normal temperature wind cooling type, HF stands for high temperature wind cooling type. ★ stands for high temperature wind fan power, the pressure loss of the dryer lower than 3%.
Technical parameter of watercooling type air dryer:Model TKD-
10NWTKD-
12NWTKD-
20NWTKD-
30NWTKD-
40NWTKD-
50NWTKD-
60NWTKD-
80NWTKD-
100NWTKD-
150NWTKD-
200NWItem TKD-
10HWTKD-
12HWTKD-
20HWTKD-
30HWTKD-
40HWTKD-
50HWTKD-
60HWTKD-
80HWTKD-
100HWTKD-
150HWTKD-
200HWrated air flow capacity (Nm3/min )10.713.5233545556585110160210working pressure 0.6-1.0(MPa)final air dryness(P.D.P)pressure dew point 2-10 ºC ( moisture content 0.6-1.4g/Nm3 )refrigerant R22power voltage 1 ∮220V3 ∮380Vrefrigeration compressor power (HP)3.03.057.510.512.51520254050Water condenser pipe dia.R1R1R1R1 1/2R1 1/2R1 1/2R1 1/2R2R2R2 1/2R2 1/2cooling watertemperature <=32ºC, pressure 0.2-0.4MPaair intake and outlet pipe dia.G2G2DN80DN100DN125DN125DN125DN150DN150DN200DN200water flow (t/h)TKDN(H)W2.0/42.0/43.6/7.25.5/117/149/1811/2213/2915/3225.5/5034.8/70lengh (mm)11401140114016501850200020002350265028203370width (mm)690690750850850900/9509501200140014001540height (mm)11051105125015001510152015301975217018601995/2334net weight (Kg)220/260220/260400/450780/860820/980950/11501000/12501400/16001800/22002500/28303300/3500Note : NF stands for normal temperature wind cooling type, HF stands for high temperature wind cooling type. ★ stands for high temperature wind fan power, the pressure loss of the dryer lower than 3%.
OuMachine Hardware r factory and workshop:
tallurgy-Machinery-p3748/">metallurgy Machinery After sales service:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw maPhysical Measuring Meter in machine is one year, the bearing is one year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.
Certification and patents of our air compressor
FAQ:
Q1:Are you factory or trade company?
A1:We are factory.
Q2:Warranty terms of your machine?
A2:One year warranty for the machine and technical support according to your needs.
Q3:Will you provide some spare parts of the machines?
A3:Yes, of course.
Q4:How long will you take to arrange production?
A4:380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5:Can you accept OEM orders?
A5:Yes,withprofessionaldesignteam,OEMordersarehighlywelcome!