China Water Filter System Lamella Clarifier River Water Treatment System for Waste Water Plant

Water Filter System Lamella Clarifier River Water Treatment System for Waste Water Plant
Lamella Clarifier System Introduction
The Lamella Clarifier System is mainly used as the primary sedimentation tank, the existing sewage plant taps the potential or expands the treatment capacity when the sewage treatment plant is limited by the floor space.
Lamella Clarifier System Fabricate Process
Lamella Clarifier System Work Process
The waste water enter the pool from the inlet pipe and flow down through the middle water inlet chamber,it is reflected by the deflector plate, and then enters the tilt plate through the inlet water distribution.
As the waste water flows upward, the solid particles are settled on the parallel tilt plates assembly, and then slide into the sludge hopper at the bottom of the sediment hopper. In the sludge hopper, the sludge is concentrated and discharged through the sludge outlet. The clarified liquid exit the tilt plate and water collecting channel by top water outlet road, then gathering into outlet sink via its adjustable weir plates. The water outlet tube in the tank will discharge the water outside.
Lamella Clarifier System Features

(1)Increase sedimentation capacity:

a) Increase the sediment area.
b) The tilt plate can re-agglomerate the sediment to enlarge the shelf material in hope of easily precipitation
c) It creates the laminar flow condition with excellent precipitation effect.
(2) The concentration of sinking sludge increased.
(3) The amount of clean water discharged is stable and there is no sludge cover.
Application of Super Lamella Clarifier System
(1) metal processing wastewater treatment
(2) CPI process wastewater treatment
(3) Surface water purification
(4) Factory waste washing water treatment
(5) Low-capacity factory wastewater treatment
(6) Municipal phosphate wastewater treatment
(7) Pulp reuse wastewater treatment
Related Product