China Wax Content Tester

TBT-0615 Asphalt Paraffin (Wax) Content Tester
Summary
This instrument is designed and made as per standardsinand . It is used to determine the wax content in the petroleum asphalts by cracking distillation.

I. Main technical featuresThis instrument adopts method of distillation cooling to determine the wax content of sample. The instrument has two parts: Upper part contains stirring motor, temperature sensor, air flow distributor and hook for sample vessel. Lower part is the cooling filterThe special designed air flow distributor and hook for sample vessel make the instrument more reasonable and convenient for use.The constant temperature bath adopts glass material. It has good heat preservation. There is no mist on the observation window. Convenient to observe.This instrument equips a high accuracy digital temperature controller with clear temperature show and simple temperature set.This instrument is floor-type structure. It can determine 3 samples at the same time. The test efficiency is high.
II. Main technical specifications
1. Power supply: AC(220±10%)V,50Hz.
2. Heating power: 700W.
3. Cooling power: 1000W.
4. Stirring rate of motor: 1200 r/min.
5. Temperature sensor:Pt100.
6. Refrigeration medium: F22.
7. Temperature accuracy: ±0.1ºC.
8. Working environment: -30ºC~40ºC,RH<85.
9. Total power consumption: ≤1800W.
10.Overall dimension:620mmx500mmx1600mm
(The air flow distributor is included)
III. Standard accessories

No.ItemUnitQty1Cooling and filtering device (including suction flask, sand core filter funnel, sample cooling tube, glass tube, glass rod, etc.)Set32Pyrolysis flask (With a handle)Piece33Sample tube (90 ml)Piece34Mercury thermometer (-30 ºC~+50 ºC, scale division is 0.5ºC)Piece15Dustproof cover (3 large and 3 small)PieceTotal 66Conical flask (250x24)Piece57Stopper for thermometer (Large)Piece18Silica gel tube (outer diameter Ф9xwall thickness1.5; length 400 mm)Piece39Silica gel stopper (5#: 2 pieces, 6#( Improved.): 2 pieces)PieceTotal 410Beaker (1000 ml)piece111Graduated flask (100 ml)Piece112Stopping ring for thermometer (1#)Piece413"O" type rubber ring (Ф31x2.4)Piece314Fuse 15 A (Ф6x30)Piece315Power supply wire(Homemade)Piece116Pneumatic distributor(Including installation frame, must install it by user self)Set117Sample container hook holderPiece118Wax filter bottle(250 mL)Piece319Three way component(One into two out, with two-way valves)Piece120Transition joints(Φ12.7 turn Φ10)Piece121Rubber tube (outer diameter Ф14xwall thickness3.5)( According to the user's need to cut the tube)Meter822Silica gel tube (outer diameter Ф18xwall thickness3.0)
( Connecting transition joints and vacuum drying box)Centimeter8

IV. Optional accessories
1.Vacuum pump: Model 2XZ-2L/S(Recommend)
2.Vacuum drying oven:Model DZF-6020(Recommend)
3. Burning furnace:Model TBT-0615-1 Cracking furnace(Recomend)
4. Balance: 0.1mg ,0.1g one set for each


2XZ-2L/S Vacuum Pump specification

Bleed (L/S)2Max Pressure(Pa)≤6x10-2Speed(r/min)1400Capacity(kw)0.37Power supply (V/Hz)220V/50HzInlet caliber(mm)(mm)(outside diameter)Φ30Noise(dBA)68Oil Capacity (L)1.0Dimension(mm)514x168x282Weight(Kg)27

TBT-0615-1 Cracking furnace
Summary
The instrument is designed and made as per the regulation of cracking distillation stove in the petrochemical industrial standard of People's Republic of China SH/T 0425-2003 "Test Method for Wax content of the Asphalt " and T0615-2011 "Asphalt Wax Content Test (Distillation Method)" in the industrial standard of People's Republic of China JTG E20-2011 "Standard Test Methods of Bitumen and Bituminous Mixture for Highway Engineering " .It is the specified equipment and matched with the "SYD-0615 Asphalt Wax Content Tester",It also satisfies the needs of petroleum products .

I. Main technical featuresThis instrument adopts the mode of electric heating ,and the constant temperature can be controlled the range of 550ºC+10ºC.The heating power can be adjusted continuously and it can satisfy the needs of the distillation of samples .The instrument adopts heating furnace and elevator-platform. Two parts are independently and in use two is made one ,it is convenient to use .The housing washer of heating furnace adopts humanized design of heat insulation and reduce the effect of the heat radiation to the operator .The temperature controller adopts LCD display, single chip control technology. Advanced technology and small overshoot .It can reach to 550ºC+10ºCconstant temperature ,which only needs 15 minutes at normal atmospheric temperature.
II. Main technical specifications
1. Power supply: AC(220±10%)V, 50 Hz
2. The electric furnace heating power:2000W
3. Heating control:solid adjustable pressure model can be adjusted continuously.
4. Constant temperature control: 550ºC+10ºC
5.Ambient temperature:≤35ºC
6.Relative humidity:≤85%
7.Total power consumption:≤2100W
8.Dimension:heating furnace:220mm*330mm*400mm
elevator-platform:150mm*1750mm*120mm
9.Weight:5kg



MP Electronic Balance
I. Feature:
1.LCD display
2.Zero in range ability
3.Auto zero-tracking
4.Auto-calibration
5.Automatic trouble diagnosis
6.Built-in under hook (optional)
7.Over-loading protection
8.RS232 communication (optional)
9.Weighing/piece counting/percentage weighing
10. Pan Size:174x143
II. Specification:

Product ModelMP31001Weighing Capacity(g)3100Readability (g)0.1Repeatability (≤g)±0.1Linearity (≤g)±0.2Gross Eight ( kg)2.8Net Weight (kg)1.9Dimension (mm)190x250x75

FA Electronic Balance

Product ModelFA2104Weighing Capacity(g)210Readability (mg)0.1Repeatability (≤mg)±0.1Linearity (≤mg)±0.2Pan Size (mm)90

DZF-6020 Drying Oven

ModelDZF6020(Advanced)Product TypeDesktop electric drying OvenVoltage220 V 50 Hz Power450 WChamber MaterialSUS304, Mirror SurfaceTemperature RangeAmbient + 5°C to 200°CTemperature Control Accuracy+/- 0.1°CNo. of shelves1 (can add to 2 as clients require)End Vacuum Level<133 Pa (1 mmHg)Chamber Size W x D x H (mm)300mm x 300mm x 275mmOverall Size W x D x H (mm)605mm x 490mm x 450mm