China Welding Flux Flux Welding

Welding Flux for metal Joint Processing SJ101,SJ301, SJ501Welding Flux SJ501 is an agglomerated aluminium titanium type acidity flux (Rutile type), with alkalinity around 0.Analysis Instrument 5-0.8. It is gray and round Access Control System grain with mesh 10-60 (2.0-0.28mm). It can be operated with AC and DC. The wire shall be connected to positive pole when applying DC.
It has steady arc, nice weld formation, anMachinery for Packaging Supplies d easy in slag removal specially at high speed. The welding porosity scarcely occur.
Caution:
It should be re-dried under 300-350oC for 2 hours . Rust, grease and moisture on the weldment should be removed before welding.Usage:
When applied to various welding wires (such as H08A, H08MnA), it can weld low- carbon steel, low-alloy high strength structural steel. It can be welding boiler, ships, pressure vessel, miniature LPG tanks, vehicles, structural steel etc. Especially usedLifesaving for fast welding of thin steel sheet.Chemical Composition (%)SiO2 + TiO2Al2O3+MnOCaF2SP25-3550-605-10≤0.05≤0.05
Mechanical Performance of the Deposited metalWiresStandard ModelsYield Point RePipe Fittings l (MPa)Tensile Strength Rm (MPa)Elongation A (%)Impact Value Kv2 (J)EL8
EL12
EM12KF6Az-EL8
F7A0-EL12
F7A2-EM12K≥330
≥330
≥410≥415
≥420
≥500≥22
≥22
≥22≥27(0oC)
≥53 (-18oC)
≥45(-200oC)
Packing Details :
1) Bag: 25KGS / Kraft Bag With Plastic Lining Inside
2) Pallet: 40 Bags (1 Ton) / Plywood Pallet
3) Container : 20-24Tons/ContainerOur service:
1) Prime quality + Competitive price + Thoughtful service = 100% Satisfactions
2) We can research and produce customized fluxes according to your different demands.
3) SAW Welding Flux Export - One Stop Solution For Submerged Arc WeldingConsumables.Other Flux Available: SJ101, SJ102, SJ301, SJ501, HJ107, HJ260,HJ431, etc.