China Welding Flux Submerged Arc Welding Flux Agglomerated Flux

High quality Submerged arc Welding FluxSJ101 & SAW Wire EM12 best matching for LPG Cylinder
Submerged arc welding flux SJ101 technical specification:Specifications:
AWS A5.17/5.23 F6A0-EL8F6A2-EM12F7A2-EM12KF7A4-EH14
EN760 SA FB 165 AC H5Description:
SJ101 is an agglomerated fluoride-basic type flux. It is gray and round grain,mesh 10-60. it can be operated with AC and DC.,the welding electric current can up to 1200A.It has excellent weldability, the welding bead appearance is beautiful and the slag is easy to remove.The diffusible hydrogen content in deposited metal is less than 5ml/100g,so it has very good toughness at low temperature,therefore,crack resistance is extremely high. It is suitable for submerged arc twin-wire,tandom and multi-wire welding as well as for welding with the two-run technique.It should be re-dried under 300-350ºCfor 2hours. Rust,grease and moisture on the weldment should be removed before welding.Usage:
It can be applied to different welding wires(such as H08MnA,H10mN2,H10MnSi,H08Mn2MoA,H08Mn2SiA etc.) It is fit for welding of low-carbon steel and low alloy steel. Such as oil storage tanks,pipeline steel,ships,bridges,pressure vessels,penstocks,boilers and H-beam structural steels.Chemical Composition(%)SiO2+TiO2Al2O3+MnOCaO+MgOCaF2SP15-2520-3025-3525≤0.06≤0.08
Mechanical Performance of the Deposited metalWIREYield
Point
Rel(MPa)Tensile
Strength
Rm(MPa)Elongation
A
(%)Charpy VNotch Impact Strength KV2(J)-20ºC-40ºCEM12≥400465-550≥22≥37EM12K≥400490-600≥22≥50EH14≥400500-650≥22≥70≥50
Packing Details:
Bag:25 KGS/Kraft Bag With Plastic LiniLCD Module ng Inside
Pallet:40 Bags(1 Ton)/Plywood Pallet
Container:20-24 Tons/Container
OEM Packing Design Can Be Accept According To Your RequirementOur service
1)Prime quality+Competitive price+Thoughtful Service=100% Satisfication
2)We can research and produce customerized fluxes according to your different demands.
3)SAW Welding Flux Expert- One Stop Solution For Submerged Arc Welding consumables.
Submerged arc welding wire EM12/EL8/EH14 technical specification:Submerged ArcWelding WireTypeGBCodeAWSCodeDescriptionH08AH08AEL8Low manganese low silicon welding wire matches with high manganese and silicon welding flux,not sensitive to the rust on the base metal;has good welding shaping and slag removal performance;it is the most frequently used submerged arc welding wire,can be used in single and double pole,AC and DC welding.Cooperated with melting-type welding flux HJ431 or sintered welding flux SJ301 and SJ501,suitable for the high-speed welding of 420Mpa class base metal,and filling welding of 450Mpa carbon steel and low alloy steel.
H08MnA
H08MnA
EM12Medium manganese medium silicon welding wire matches with medium manganese and silicon welding flux,not sensitive to the rust on the base metal;has good welding shaping and slag removal performance;it can be used in single and double pole,AC and DC welding.Cooperated with melting-type welding flux HJ350 or sintered welding flux SJ301,suitable for the hiValve gh-speed welding of 420Mpa class base metal and filing welding.It is used for the corresponding strengthen level of low-alloy steel welding of ships,chemistry,bridges and steel structure.H10MNH10MN EH14Welding line metal with good mechanical properties can be obtained by cooperating with the corresponding welding flux(e.g.HJ230 and HJ350),used for the submerged arc automated welding of carbon steel and low alloy steel such as15Mn and 14MnNb;cooperated with the sintered welding flux SJ101,suitable for the high-speed welding of 42Mpa class base metal and filling welding.It is used for engineering welding such as ships.Wire For Submerged Arc WeldingChemical Composition(%)CMnSiPSCuNiCrEL8≤0.100.30~0.60≤0.030≤0.030≤0.030≤0.20≤0.30≤0.20EM12≤0.100.80~1.10≤0.070≤0.030≤0.030≤0.20≤0.30≤0.20EH14≤0.121.50~1.90≤0.070≤0.035≤0.035≤0.20&Alarm & Security Systems le;0.30≤0.20Wire For Submerged Arc WeldingMechanical PropertiesTensile StrengthYield StrengthElongationTest TemperatureAbsorbed EnergyEL8415~550≥330≥22-20ºC≥27EM12415~550≥330≥22-20ºC≥27EH14415~550≥330≥22-20ºC≥47
Application:
Packaging &shipping:
Production line:
Essen FAIR:
Warehouse:
Factory Introduction:
LAIWU HULIN WELDING MATERIALS CO.,LTD. istop three original factoryof welding consumables in China.
Factory was founded in 1994, quality systerm: ISO9001-2008.
Main products:
SAW Flux(SJ101, SJ301, SJ501,SJ601,HJ431etc.);
SAW Wire (EM12K,EL12,EL8,EH14)
Carbon Steel Welding Rod: AWS(E6011, E6013, E7016, E7018);
CO2 Gas Shield Welding Wire AWS A5.18 ER70S-6(0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm)
Flux Cored Wire(Gas Shield E71T-1C, E71T-1;Self Shield E71T-GS); Mould
Application: Spiral steel pipe,API pipe, Structural steel, LPC Gas Cylinder, Pressure vessel, Boiler, Bridges etc.
Yearly capacity:30000mt
OEM &buyer label is ok. Technical support can be offered.
FAQ:
Q. 1Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2What is your delivery time?
A: Within Universal Hardware Parts 7days after receiving deposit.
Q: 3Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4How about OEM?
A:OEM IS OK.
Q. 5Why we should choose your company?
A: Firstly, we areORIGINAL factory. We canguarantee delivery timeand provide special requirements for customers.
Secondly, we have professional foreign trade team with highefficiency communications and professional solutions.
Thirdly, we have special team work for after salesservices 24*7to help you slove any kind of problemCONTACT: