China Welding Machine Parts High Current Slip Ring High Power Slip Ring

Rotatable Welding Current Transmission Slip RingByTune manufactures the slip ring by copper because its superior electrical conductivity and heat dissipation properties. Copper's superior conductivity enhances the efficiency of electrical motors. ByTune can manufacture the unique feasible current transmission devices with 20 years industry experience according your application's specs. So if you have special requirements please do not hesitate to consult us.Product Description
DetailsMilitary MaterialCopperOperating-40ºC~+ 80ºCContact materialprecious metalCurrent400~800AElectric noise≤10mΩWeight3.84KgShaft Diameter40~70mm
Rotatable welding current transmission devices applied to connecting on shafts with conical clamping sleeves. It is suitable for the diameter of shaft from 40mm to 70mm. The current transmission device commonly utilized for machines and fixtures, the typical application is various welding equipments.Product Display

ByTune's Advantage20 industry experience

Reliable after-services

Quality guaranteed 1year

More than 200 sets of advanced machines

Professional engineering team with 10~20 years experience

Installation Instructions

Careful installation, adequate cross sections for the power feed and outlet cables and adherence to the recommended lubricating intervals are essential for reliable operation and along service life of the current transmission devices.

Installation on the shaft

1. The shaft should be atolerance and have asurface finish comparable with aball bearing seat.

2. Before installation, removing the adapter sleeve, cleaning the shaft and all components and applying athin film of oil.

3. The grooved nut must be tightened manually using asickle spIndustrial Robot anner to DIN 1810 of appropriate size and then secured using the locking plate.

Notices

1. Flexible cables or copper strip should be used.

2. Torsion of the casing should be prevented by the use of fastened on the right and the left with aplay of approx.2mm to the terminal lug.

3. No radial or axial load must be applied to the casing.(when dismantling, still doing this)

Lubrication

Before putting the devices into operation, re-grease it in an idle condition until grease emerges from the O-ring seal.

1. P34 special grease should be used exclusively for re-greasing to ensure perfect functioning and the maximum service life.

2. The devices have an R1/8" greasing point. If necessary, apipe should be installed and connected to the device using Connector & Terminals ahouse. The overaBall Screw ll length should not exceed 1.5m.

3. The device should be re-greased after amaximum of 30,000 rotations,or after 500operating hours, whichever is the earlier.

Notices

1. The current transmission devices used either in applications where agreasing requirement only arises after anumber of months or in special applications such as 24h operation,a rotation speed of more than 5rmp.

2. The use of an electronically controlled grease cup is recommended.

TypicalApplicationAuto Euipments
VariouCutting & Fold-bend Machine s Welding Equipments etc.Main Cooperators

FAQ:

Q1: Do you offer the sample?

A: Yes, Of course! Free samples available.

Q2: what the lead time?

A: 2weeks for standard model, 4~6 weeks for customization.

If you are interested in, please do not hesitate to contact us