China Well Completion Tools Bridge Plug

WELL COMPLETION TOOLS
Model STWB Wireline Set Bridge Plugs are compact, small OD and designed for easy drill out. These bridge plugs will set securely in all but the very highest tensile casing. A ratchet lock ring stores the setting force in the plug. The one piece packing element and metal back up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be easily drilled out. They are available for 2 3/8" through 20" casing.
Features:Can be set directly with Baker wireline setting toolsEasy for mill outRatchet lock rings secure dynamic setting forceOne piece packing element and rocker action metal back up rings combine for a superior sealShear studs are Baker style and connect directly to the Baker Adjuster SubThese bridge plugs can be run directly on Baker Setting Sleeves and Adjuster SubsCrossovers arenot required

Part NumberCasing
ODCasing WtSetting RangeSet­
ting
ToolSetting kitsTool ODRelease
Force (in)(lbs/ft)Min (in)Max (in)(in) (lbs) D22-0237-0082 3/84.0-5.81.782.074 /1.75 D22-0287-0082 7/86.4-6.52.342.525#5/2.229,000D22-0352-0083 1/25.7-10.32.8673.258D22-0351-1002.75 D22-0350-0083 1/212.8-15.82.5482.764 /2.4313,000D22-0400-00845.6-143.343.732#10D22-0400-1003.1420,000D22-0450-0084 1/29.5-16.63.8264.09D22-0450-1003.59 D22-0500-008511.5-20.84.1544.56 D22-0500-1003.9333,000D22-0550-0085 1/213-234.585.044 D22-0550-1004.31D22-0575-0085 3/414-25.24.895.29 D22-0575-1004.7 D22-0662-0086 5/817-325.5956.135 D22-0662-1005.37 D22-0700-008723-355.9386.336 D22-0700-1105.68 D22-0701-008717-236.3366.538 D22-0701-1106.00 D22-0762-0087 5/820-396.6257.125 D22-0762-1006.31 D22-0862-0088 5/824-497.318.097#20D22-0862-1007.12 D22-0962-0089 5/829.3-58.58.4359.063 D22-0962-1008.1250,000D22-1075-00810 3/432.7-60.79.6610.192 D22-1075-1009.43D22-1176-00811 3/438-6010.77211.15 D22-1176-10010.43 D22-1175-00811 3/460-8310.19210.772 D22-1175-1009.94 D22-1337-00813 3/848-84.512.17512.715 D22-1337-10011.88 D22-1600-0081665-11814.57615.25 D22-1600-10014.12 D22-2000-0082094-13318.7319.124 D22-2000-10018.37

Model SCP Composite Bridge Plugs are used for temporary or permanent isolation of oil, gas and water, such as zone isolation, formation fracturing, acidizing. These easy drillable bridge plug can be use for multi zone fracturing especially, so it will be a good choice for shale gas exploration.
SCP-P Solid body
SCP-F No-solid body
SCP-D No-solid body, cage type
Features:Can be set directly with SWSG/SWSB wireline or SHSG/SHSB hydraulic setting toolEasy for mill outSlope bottom can stop the rotation of the bridge plug

SPECIFICATIONSPart numberModelSizeCasing WtDimensionSetting rangeRelease
forcePres­
sureTempODIDLengthMinMaxinchinchinchinchinchlbsPSI°FD125082300SCP-P (Solid body)5"11.5~213.920.7524.984.1204.56036,00010k300D1255823005 1/2"15.5~234.36 32.384.6704.95033,00010k300D1270823007"23~355.63 355.9386.36655,00010k300D144082300SCP-F
(No-solid
body, ball
type)4"5.6~143.190.7526.333.3203.54826,00010k300D1445823004 1/2"9.5~15.13.610.7522.683.8264.09026,00010k300D1450823005"11.5~213.920.7524.984.1204.56026,00010k300D1455823035 1/2"15.5~234.36130.234.6704.95033,00010k300D1470823007"23~385.631.538.535.9206.36655,00010k300D145082301SCP-D(cage
type)5"11.5~213.920.7526.764.1204.56035,00010k300D1455823015 1/2"15.5~234.36130.234.6704.95033,00010k300

Model STMB Mechanical Bridge Plugs are used to isolate zones for temporary or permanent abandonment. These drillable bridge plugs set securely in any hardness casing. A ratchet lock ring stores the setting force in the bridge plug. The one piece pack­ing element and metal back up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be easily drilled out. They are available for 4 1/2" through 16" casing.
Features:Sets securely in most casing, including many premium gradesRatchet lock rings secure dynamic setting forceOne piece packing element and rocker action metal back up rings combine for a superior sealCompact, easy runningPressure balanced sleeve valve is opened and closed by tubing manipulation from the surface for better controlSet with Model STSB Mechanical Setting ToolThese bridge plugs can be set on any standard baker style mechanical setting tool

Part NumberCasing
ODCasing WtSetting RangeTool ODRelease
ForceSetting Tool(in)(lbs/ft)Min (in)Max (in)(in)(lbs)D22-0450-0094 1/29.5-16.63.8264.093.5933,000D22-0450-004D22-0500-009511.5-20.84.1564.563.93D22-0550-0095 1/213-234.585.0444.31D22-0550-004D22-0575-0095 3/414-264.895.294.7D22-0575-004D22-0662-0096 5/817-325.5956.1355.3750,000D22-0662-004D22-0700-009717-356.0046.5385.68D22-0700-004D22-0762-0097 5/820-396.6257.1256.31D22-0762-004D22-0862-0098 5/824-497.5118.0977.12D22-0862-004D22-0962-0099 5/829.3-58.48.4359.0638.12D22-0962-004D22-1075-00910 3/432.75-60.79.6610.1929.43D22-1075-004D22-1176-00911 3/438-6010.77211.1510.43D22-1176-004D22-1175-00911 3/460-8310.19210.7729.94D22-1175-004D22-1337-00913 3/848-80.712.17512.71511.88D22-1337-004D22-1600-0091665-11814.57615.2514.12D22-1600-004

Wide Range Wireline Set Bridge Plugs are specially designed to run through tubing or restricted pipe and set securely in larger tubing or casing below. These bridge plugs will set securely in any hardness casing. A ratchet lock ring stores the setting force in the plug. The three piece packing element and metal back up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be easily drilled out. They are available for 1.610" through 5.044" setting range.
Features:Sets securely in any hardness casing, including premium gradesRatchet lock rings secure dynamic setting forceThree piece packing element and rocker action metal back up rings combine for a superior sealCompact, easy runningCan be set either with GO, Baker or Gearhart wireline setting tools

SPECIFICATIONSPart NumberSetting RangeTool ODRelease ForceMin (in)Max (in)(in)(lbs)D16-0237-0011.610"1.995"1.468"8,000D16-0238-0011.905"2.441"1.750"12,000D16-0239-0012.156"2.765"1.906"D16-0350-0012.375"3.000"2.187"D16-0351-0012.441"3.343"2.281"D16-0400-0012.875"3.500"2.500"25,000D16-0401-0013.187"3.920"2.750"D16-0450-0013.920"4.276"3.250"30,000D16-0500-4023.696"4.276"3.500"D16-0550-0014.154"5.044"4.062"

Model SHMB Hydro-Mech Set Bridge Plugs are used for temporary or permanent isolation of oil, gas and water, such as zone isolation, formation fracturing, acidizing. These bridge plug can be set by drop a ball and up lift, do not need any setting tools. They are available for 4 1/4" through 20" setting range.
Features:Compact, easy runningCan be released by right hand rotation in an emergencyOne piece packing element and rocker action metal back up rings combine for a superior

SPECIFICATIONSPart numberCasing
ODCasing WtSetting rangeTool
ODPressureRelease
forceConnection thread(in)(lbs/ft)Max(in)Min(in)(in)(PSI)(lbs)D22-0450-3034 1/29.5-16.63.8263.593.5910,00033,0002 3/8"EUE BOXD22-0500-303511.5-20.84.1543.933.93D22-0550-3035 1/213-234.584.314.31D22-0575-3035 3/414-25.24.894.74.7D22-0662-3036 5/817-325.5955.375.3750,0002 7/8"EUE BOXD22-0700-303723-355.9385.685.68D22-0701-303717-236.3366.006.00D22-0762-3037 5/820-396.6256.316.31D22-0862-3038 5/824-497.317.127.12D22-0962-3039 5/829.3-58.58.4358.128.128,0003 1/2"IF BOXD22-1075-30310 3/432.7-60.79.669.439.435,000D22-1176-30311 3/438-6010.77210.4310.434,000D22-1337-30313 3/848-84.512.17511.8811.883,0004 1/2"IF BOXD22-1600-3031665-11814.57614.1214.121,500D22-2000-3032094-13318.7318.3718.37

Model "SRWB" wireline set retrievable bridge plug is a medium perfor-mance retrievable bridge plug that is run and set by a wireline pressure setting tool and retrieved by either tubing or sandline. The plug is used for zone isolation, formation fracturing, acidizing,and wellhead repair and can be lubricated in and out of the well under pressure, thereby eliminating snubbing tubing or killing the well. The plug features a balanced equal-izing value located immediately above the packing element system. Caged, bi-directional, one piece slips are located below the packing and firmly anchor the plug against pressure differentials from above or below. The plug is retrieved by ratcheting onto the retriev-ing neck, picking up four inches to equalize, setting down to uplock, then picking up to remove from well.
No rotation is required to retrieve.
Features:Compact, fast running, electric wireline set.Tubing or sandline retrievedNo rotation requiredBalanced equalizing valve opens upwardly which reduces possibility of accidental opening.Equalizes close to top of packing elements tubing manipulation from the surface for better control

SPECIFICATIONSPart NumberCasing ODCasing WtSetting RangeTool ODSetting
ForceTubing Retrieving
Tool(in)(lbs/ft)Min(in)Max(in)(in)(lbs)D17-0450-0014-1/2"9.5-13.53.924.093.77130,000D17-0450-023D17-0500-001515-184.2764.4084.125D17-0550-0015-1/2"20-234.674.7784.5D17-0550-049D17-0550-00215.5-204.7784.954.641D17-0550-00313-15.54.955.0444.781D17-0625-0016-5/8"24-325.6755.9215.555,000D17-0700-053D17-0625-0017"32-356.0046.0945.812D17-0700-00226-296.1846.2765.968D17-0700-00323-266.2766.3666.078D17-0700-00417-206.4566.5386.266D17-0762-0017-5/8"33.7-396.6256.7656.453D17-0762-00224-29.76.8757.0256.672D17-0862-0018-5/8"32-407.7257.9217.531D17-0862-080D17-0962-0019-5/8"40-478.6818.8358.437D17-0962-046D17-0962-00247-53.58.5358.6818.218