China Wenhong Machinery Automatic Folder Gluer Machine for Double Pieces

High-speed automatic carton box folder gluer machine using double-sided tooth rod adjustment mechanism, making box is suitable for different specifications, easy to operate.
Gluing POTS on the two devices, suitable for bottom, two side posts.
Cylinder around paste two device for special box type to use.
Using photoelectric counter quantitative count, automatic kick board device marks.
Attached finished product cross send device, easy to finished product collection.
Power transmission using strong gauge belt, high efficiency, low noise, easy maintenance.
High-speed motor adopts frequency conversion, PLC control system, and imported components.
Quick easy operation, beginners to master.
>>> Specification
Model No.WH-1800D WH-180000DS (crash lock bottom)Box size 400-1800 mm 400-1800 mmMaterialscardboard,card to card paper board,card to corrugated paper boardFeeding
Methodsa. Sunction belt continuously feeding paper intermittently
b. Sunction servo positioning feeding paper Gluing Type Section 1: gluing paper A with paper B
Section 2: folding the combined paper
Section 3: pressing the folded box
Section 4: counting and stacking boxesSection 1: gluing paper A with paper B
Section 2: folding the combined paper ,lock bottom
Section 3: pressing the folded box
Section 4: counting and stacking boxesSpray-glue Typea. Combined paper A and B with American Nordson hot melt spray system with instant paste melt glue
b. Folding section with solute white glue in gluing tubeSpeedMAX. 300m/min Power 20KW. AC380V Air Pressure6-8kg/cm² Machine Size L17.5xW2.98xH2.5 metersMachine eight14.8 Tons 15.8 Tons

>>> Sections

A feeding system
A department to the paper system using intermittent suction to the paper;
The paper feeding belt adopts Japanese Rita imported belt, high friction coefficient, good wear resistance, suitable for long-term operation;;
The high pressure air suction system can be firmly adsorbed on the belt to send out a reliable, high stability;;
The paper knife and a paper knife can be adjusted for different kinds of paper;
The next paper paper can ensure uninterrupted, increase production efficiency.
B feeding system
The same with Japan Rita imported suction belt;
Servo paper feeding mode, high speed computer tracking and positioning;
Paper knife and paper cutting knife is also applicable to all kinds of paper;
The German electric eye detection system for two pieces of synchronization to provide a reliable guarantee;
The German speed monitoring of rotary encoder can make two identical speed.

The board can be made from the push claw, so that the board can be fixed in order to track the B film; Push claw correction can ensure the position of the board is correct;
Edge correction can make two pieces of cardboard can not fit the error;
After correcting the board spacing error can be kept within + 1mm.
The original United States Nordson hot melt adhesive spraying system
The glue by the electric control signal and the error is very small;
There is a separate rotary encoder to provide speed signals;
The length of the glue and the size and position can be adjusted on the computer.

Pre-folding
The original United States Nordson hot melt adhesive spraying system
The glue by the electric control signal and the error is very small;
There is a separate rotary encoder to provide speed signals;;
The length of the glue and the size and position can be adjusted on the computer.
Crash Lock Bottom (2400DS)
Three groups of upper and lower bands.
Four groups of the bottom device and the help button, to meet the needs of a variety of box type.
On the paste tube about two devices, suitable for the end of the end of the use of stickers and side stickers.
Folding
At the entrance of the folding part is equipped with a set of bottom paste tube;;
As the carton forming, two seat belt is used to stabilize the cartons, the other is equipped with a box device for box molding;
The left and right folding belt can move up and down to adjust the level of the paper box line;
The outlet is connected with the clamping part of the entrance, the middle bar is equipped with a pressure wheel for forming stable flat carton.
Pressure Correction
At the entrance of the folding part is equipped with a set of bottom paste tube;;
As the carton forming, two seat belt is used to stabilize the cartons, the other is equipped with a box device for box molding;
The left and right folding belt can move up and down to adjust the level of the paper box line;
The outlet is connected with the clamping part of the entrance, the middle bar is equipped with a pressure wheel for forming stable flat carton.


imported PLC controls the operation of machine and self diagnose monitoring system(display screen).
Electrical components and electrical wiring adopt EU advanced safety standards.(CE approved)

>>> about Us
Headquarter
Add: Wenhong Industrial zone, kukeng, Guanlan,Shenzhen,China.
Postal Code: 518110
Tel: +86-755-2808 8188 Fax: +86-755-2808 8558
Wen Hong Jiang Su
Add: No.88, Hai Lun Road, Su Tong Science and Technology Industrial Park, Nan Tong City, Jiang Su Province.
Postal Code: 226000
Tel: +86-513-85500888 Fax: +86-513-8590 0666
Website : whmachinery.en.made-in-china.com