Dry Powder Wheeled Fire Extinguisher 50kg
·ISO 9001 certified quality management system,CE approved
·Suitable against class A, class B, class C, and live electrical fires
·All fire extinguishers must be serviced in accordance with BS5306
·Polyester powder external coating (Red, Cream)
·All fire extinguishers are tested no leakage.
·Chemical Agent: ABC40%, Pressured with nitrogen gas.
·Working Pressure: 15Bar; Test Pressure: 35Bar;
·EN1866-1 Certification
Stored TypeExternal TypeCapacity25Kg50Kg25Kg50Kg100Kg25Kg50Kg100KgItem No.PSE24-01PSE24-02PSE25-01PSE25-02PSE25-03PSE26-01PSE26-02PSE26-03Out-dia.(mm)270320270320406270320406Cylinder Length(mm)62587562587511006258751100Cylinder Weight (kg)1121203250203250Extinguisher Weight (kg)5695559316060100180Volume(L)305930591243059124Filled Weight(kg)255025501002550100Temperature Range-20+55ºC-20+55ºC-20+55ºC-20+55ºC-20+55ºC-20+55ºC-20+55ºC-20+55ºCWorking Pressure(bar)1515151515-- -- -- Testing Pressure(bar)353535353535 35 35 Min Wall-Thickness(mm)2.53.02.53.03.02.53.03.0MaterialHP295/B440HPHP295/B440HPHP295/B440HPHP295/B440HPHP295/B440HPHP295/B440HPHP295/B440HPHP295/B490HPFire Class55A 1BC55A 2BC55A 1BC55A 2BC55A 3BC55A 1BC55A 2BC55A 3BCPacking Size(cm)58x47x9763x50x11144x45x9563x50x11162x57x12244x45x9563x50x11161x52x112
Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used