China Wholesale 13.56MHz ISO14443A RFID Reader Wieg26 Bits Wieg34 Bits for Card Access Control System

wholesale 13.56MHZ ISO14443A rfid reader wiegand 26 bits wiegand 34 bits card access control system

Specification

Less than 0.2 second Response SpeedLess than 0.5 seconds Proximity Time Distance2-15cm Proximity RangeSupport 13.56Mhz MF ISO14443ABuilt-in AntennaBuilt-in LED (Double Color LED)Built-in Loud Speaker (Buzzer)DC 12V Working Voltage,70mA Working Current100 Meters Communication DistanceReal Time Data TransferBlack ColorPVC Case Material (Black Resin for Water-Proof Function)76*114mm*16mm

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red DC 12V

Black GND

Green D0

White D1

BlueLED

Yellow Beep

Grey WG34 ( if you need wiegand 34 output , kindly connect the grey cable to GND)

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires

Packing list for RFID Reader

1* RFID Reader

1* User Manual

1*Gift Box

Remind:

1.The package not including any screws .

2.This reader not support NFC cards and tags .

Application

Certification
Wire diagram

Photo