China Wireless Communications 98-Kc11 Cold Shrink Tube

Description
VOSLUN VL-KC series Series provide the correct Cold Shrink tube or the correct Cold Shrink tube and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.
Applications
The main application is the sealing of coax connectors used in the wireless communication antenna market in Europe, South America, Africa, West Asia markets. These mainly outside installed connectors require an extra sealing. Up until now, sealing tapes or Heat Shrink tubes were used.

Technical Information
The outer Cold Shrink tube is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube. The kits passed the .5 bares water pressure sealing test and met IEC 529 IP 68.
Dimensions

3M Spec.Volsun Spec.Cables to Connect 98-KC11VL-KC11½" terminationor ½" to ½" splice98-KC21VL-KC21½" to 7/8" splice 98-KC31VL-KC31½" to 1 1/4" or 1 5/8" splice