China Wood Doors Jointing Use Cold Water Based Glue

Shanghai Rocky Water based Adhesive
Fast drying adhesive for vacuum membrane pressing

Vacuum membrane press adhesive is used for vacuum forming products like vacuum forming door, kitchen cabinet panel, sound box panel, computer desk etc. It has excellent performance on heat resistant, fast drying, small partical diameter, endurance bonding strength and atomization.

ItemContentBrandRockyProduct nameMembrane press adhesiveTypeWater base adhesiveMain componentWPU(water polyurethane)ApperanceWhite emulsionClassificationSingle component, if want to increase the heat resistance, can add 2%~5% hardenerOperation temperature15ºCminOperation modeSpray the adhesive on the based materials such as wood door, then put it into the vacuum forming machine, heat the decorative PVC film, finally do the membrane press

Membrane press adhesive is applied in vacuum membrane press machine for making membrane pressing worktops. It is used for vacuum covering wooden boards like fiber board, particle board, timber, plywood, MDF with hard or soft thermoplastic films like PVC, TPE, PETG.
Operation Procedure

No.Content1Spray the glue to the part of wood that needs wrapping, until a white layer of glue appears on the surface2After the glue dries naturally, i.e. the white glue becomes transparent and no fingerprint is left after pressed by fingers, the wood can be put into the vacuum suction machine;3Use the vacuum suction machine to wrap the wood. Due to the different specification of the machine and heat resistance of PVC films, the heating temperature shown on the vacuum suction machine varies a lot, but it should subject to the temperature of the wood which is between 50~60ºC;4The forming process in the vacuum suction machine includes 6 steps: preheating, heating, vacuum pressing, stop heating, stop vacuum pressing, natural cooling.

Packaging & Shipping

In terms of packaging, if the order is less than one container, membrane press adhesive is usally packed in plastic barrel, which is 30kg/barrel; if the order is in full container, it is usally packed in iron barrel, which is 200kg or 1000kg/barrel. The packaging ways, materials, patterns can be customizable.

In terms of shipping, for large quantity, it usually goes by sea and can be delivered within 30 days; for samples, it normally goes by air and can be delivered within 7 days. The normal shipping port is Shanghai. If need, can ship from other ports.
PRODUCTION LINE

Our Factory

We, Shanghai Rocky Adhesives Co.,Ltd, starts the production of adhesives since 1995. Up to now, we own two factories with advanced production equipment and detection instrument. The Shanghai factory has a workshop of more than 10,000 square meters with annual productivity of 20,000 tons. The Chengdu factory has a workshop of more than 30,000 square meters with annual productivity of 50,000 tons of adhesives. Rocky is one of the most largest production bases of high grade hot melt adhesives and water based adhesives. Its customers can be found in 31 provinces around China. Meanwhile, its products have been exported to Russia, Southeast Asia, South Asia, Middle East, South America, etc.

We are looking distributors around the world, if interest, welcome to contact us for details!