I. Practical Application:
To emboss the suface of WPC finished products, to make it like real wood.
II. Advantages:
1. Profile thickness for processing:5-120mm/5-200mm
2. Front support shelf fixed;lower roller fixed and upper roller side up and down along guide track
3. Embossing depth adjustable with air cylinder, which is convenient, stable and reliable
4. Separated driving forces for Upper and lower rollers to avoid skidding. Power: 1.1*2KW
5. Processing surface: 2 rollers(one smooth roller and one curved roller)If customer requires for 2 surfaces embossing,also OK.
III. Technical parameters
SWYH360-60 WPC Single-face Embosser
1. Embossing depth: 0.4-0.7mm;
2. Useful width of embosser: 360mm single-surface embossing,
3. Distance between two rollers: 5-60mm;
4. Roller diameter: ∮ 295mm,
5. Roller speed range: 0.5-12m/min, speed governed by TECO inverter,
6. Embossing depth adjust: With oil pressing and manual micro-adjust(with pressure protection system),
7. Roller material: 45 or 40Cr steel pipe
8. Support shelf in front and back. Height adjustable,
9. Heating power for roller: 6KW( rotary conductive loop heating),
10. Roller main power: 3KW;
11. Buffering system for material inlet(buffering in oil tank itself). Working pressure 1-5Mpa.
SWYH360-200 WPC Double-face Embosser
1. Embossing depth: 0.4-0.7mm;
2. Useful width of embosser: 360mm single-surface embossing,
3. Distance between two rollers: 5-200mm;
4. Roller diameter: ∮ 295mm,
5. Roller speed range: 0.5-12m/min, speed governed by TECO inverter,
6. Embossing depth adjust: With oil pressing and manual micro-adjust(with pressure protection system),
7. Roller material: 45 or 40Cr steel pipe
8. Support shelf in front and back. Height adjustable,
9. Heating power for roller: Single-roller 6KW( rotary conductive loop heating), double-roller 12KW;
10. Up and down roller main power: 1.1*2KW;
11. Buffering system for material inlet(buffering in oil tank itself). Working pressure 1-5Mpa.