China Wood Grain Finish Electrostatic Spray Powder Coating for Aluminum Door

Wood Grain Finish Electrostatic Spray Powder Coating For Aluminum Door
Used tools & products
Spray Gun,Curing Oven & Heat transfer machine
Powder coating & Wood effect paper or film
Process
1. Electrostatic spraying powder coating on the metal products
2.Curing in the oven
3.Use heat transfer machin to transfer the wood effect paper or film on the finish metal products
Application
Used for furnitures,metal doors & so on products

DEscriptION

Sublimation powder coating is also called Heat Transfer Powder Coating because of the process of heat transfer printing.This process is a sublimation process,which is a phisycal-chemical transition of a pattern from transfer paper or film to a substrate which is pre-coated with a special powder designed to be as the base color of this sublimation.Through this sublimation process countless effects and patterns such as woodgrain, marble, granite, fancies, pictures can be transferred on substrate surfaces.This series is available in a variety of color, gloss, finishes and shapes.The coating is flexible and non-sticky paper, so that the prefabricated steel could be coated with this products before post-forming.To learn more about this application process,please refer to Heat Transfer Process.

POWDER CHARACTERISTIC

Chemistry: Epoxy Polyester/Polyester / PolyurethaneParticle size: Suitable for electrostatic sprayingSpecific gravity: 1.2-1.7g/cm3 up to colorsCuring schedule(object temp.): 180ºC/10-15minutes;200ºC/6-10minutes;Storage: Dry ventilation conditions below 30ºCShelf life: 12months

APPLICATION AREA

FurnitureGeneral IndustryArchitecture Construction

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

Mechanical property

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993, AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88,2mm Cross cut, ISO2409

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi

Pass H-2H

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T17740-79(89),1000 hours

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313,500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light

We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae