China Wood Peeling Machine Plywood Machine Woodworking Machinery

Plywood Production Line Machines for Plywood Factory

PRODUCT DEscriptION1.Plywood production line mainly include following machines,Log debarker machine,veneer peeling machine,stacker machine,veneer drying machine,Glue spreader machine,Plywood cold press machine,plywood hot press,sanding machine.2.It can be customized by your capacity,budget,factory size,Raw material size etc,design all project.3.Our plywood production line is designed of use less and less workers.4.Plywood production line is high efficiency and durable.5.Plywood production line all designed by 20 years engineer,rich experience and high technology.
The plywood production line is akind of artificial board which is used to spin the log into asingle board, and then vertically aligned with each other in the direction perpendicular to the fiber direction.
PlyShopping Bags wood production line according to its process includes: rotary cutting section, veneer drying section, gluing section, pre pressure section, press section, saw side section, sanding section.
Plywood is the ideal products are widely used in all kinds of furniture, office equipment, combination of speaker, packaging industry exhibition.PLYWOOD PRODUCTION TECHNOLOGY
1) Log cutting:
Usually import log length is more than 6meters. Cutting according to the technology required length and quality. The cutting length should be product length add remains. For example, product is 1220mm*2440mm, cutting length usually be 2600mm or 1300mm. log length, camber and demerit affect plywood output directly. Remains are small wood pieces, truncations, sawdust, tec. Log cutting wastage ratio is 3%-10%.
2)Veneer peeling:
Peeling is the most popular plywood producing process. Back veneer thickness is about 0.6mm, core veneer and centre veneer thickness is about 1.8mm.
3) Drying:
Veneer is moist. it should be dried according to the technology requirement. After drying, it will shrink. Dimension will become smaller. Veneer length, width, thicknesswill shrink. Shrink wastage is related to wood material, moisture containing, veneer thickness. Shrink wastage is 4%-10%.4) Veneer gluing and handling:
Handling include cutting, putting veneer together and mending. Cut zonal veneer into specification veneer or proper size which can be put together. Narrow zonal veneer can be put together into one veneer. Veneer with demerit can be mended to be qualified. Wastage in this part related to log material, peeled veneer quality, dried quality, and worker operation skill. Wastage ratio is 4%-16%. import veneer processing plywood wastage ratio is 2%-11%.5) Cold and Hot press:
Veneer be glued and stackWashing Equipment ed, then glue together under set temperature and pressure by hot press. As veneer temperature and moisturMattress Machine e containing changes, veneer will shrink. Shrink wastage is related to temperature, pressure, hot press time, wood material, moisture containing,wastage ratio is 3%-8%6) Edge trimming:
Trimming the edge of the plywood flank from hot press to qualified plywood board. Remains related to process remains and product dimension. Production is bigger, wastage is smaller.Wastage ratio is 6%-9%7) Sanding:
Sanding plywood surface to make it good. Wastage is powder. Veneer quality is good, sanding is less. Wastage ratio is 2%-6%8) Warehousing:
Plywood is packing in palletize or in bulkFACTORY INTRODUCTION
Linyi Ruifeng Machinery Factory: Founded in year of 1993, LINYI RUIFENG MACHINERY FACTORY now is one of the professional wood-based panel machinery manufacturers in China. 25 years' hard work and innovation, RUIFENG becomes to the most reliable brand in domestic market. We do produce all kinds of wood machinery, especially the Forming machine, Cold press, Hot Press, Dryer as well as other machines. And we are capable to produce whole production lines like OSB Line, MDF/HLD Line, Particle Board Line, Block Board Line as well as Plywood Line. We successfully installed wholes lines in Russia, Uzbekistan, Vietnam, Ethiopia as well as other countries
We have Engineering team to make layout design for customers and to supply reasonable solutions according to request like the raw materials, the designed annual output, the environment policy as well as other facts. And we have Technician team to supply customers professional after-sales service like overseas installation, worker's training, equipment adjustment and equipment maintenance.
From domestic market to overseas market, RUIFENG grows up to be stronger and will be much more stronger in the cooperation with more and more customers all over the world.
OUR SERVICE
Pre-sale services:
1)Provide the free consultation of the equipment.
2)Provide the standard device and the flow chart.
3)According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment
4)Welcome to visit our factoryServices during the sales:
1)Inspect the machine before leaving the factory
2)Oversea install and debug the equipment
3)Train the first-line operator
After sale services:
1)24 hours online service
2)Provide the VIDEO with install and debug the equipment
3)Provide technical exchanging