China Wooden Toy Wheels and Wall Hanging Decorative Wood Wheels

Wooden Toy Wheels
Wooden wheels can be used as display wheelbarrow wheels, display cart wheels and display wagon wheels. They are also good home decoration when hang on wall. You can also place them in garden for climbing plants such as morning glory and beans to climb on.
Wooden wheels are not like plastic and metal products mass produced by machines, they can be only hand made by experienced craftsman. Without years of experience, you can not make a wheel well enough.
Species for making the wheel is fir wood, this wood features with anti insects and stable character in outdoor space. Before production, wood boards will be kiln dried to keep moisture content between 8-15, this will enable final products keep stable without split.
Felloe of wheel comprises of 8 pieces of curved wood boards, tongue and groove jointed.
Center hub drilled with hole for installation of axis.
Wooden hub and felloe connected by 12 wooden spokes, this is a strong design than those wheels with 8 or 10 spokes.
When all glue in the wheel dry enough over 2 days, our craftsmen will sand wheel smooth with sandpaper by hands. No burr left and any defects will be repaired.
Finally flat metal tire will be installed to felloe, it is coated black and will not rust in outdoor and wet places. metal tires keep wheels safe when wheel around, wheels will not hurt by small stones or other shape obstacles with the protection of metal tires.
Wooden wheels can be natural finish, burn finish, stain finish and paint finish. If you get a natural one, you could stain or paint to color you like.
Characters:
* natural, burnt, paint finishes
* 12 spokes, strong design
* metal strip reinforced
* series sizes
Specs:Item Dia (inch)Thick (inch)FinishPcs/ctnGWW42421.4natural, burn, stain5GWW36361.4natural, burn, stain10GWW32321.4natural, burn, stain10GWW24241.4natural, burn, stain10GWW12121.4natural, burn, stain20GWW10101.4natural, burn, stain20Main Customers: 1. Different requirements on products.
Usually, we will accept the feasible changes on our products as your requirements.
2. Lead time.
Usually, lead time is about 40-50days.
3. Sample time.
Usually sample time is about 7-10 working days. If the samples you required are in our warehoue, we will charge no sample fees, but the delivery cost will be paid on your side. If we need to do the new samples for you, we will charge 2 or 3 times sample fees, also delivery cost will be paid on your side.
4. MOQ
Usually we ccept 300pcs per size.
5. Payment term.
Usually we accept 30% down payment, balance to be paid against copy of BL. We also accept L/C at sight.