China XLPE PVC Insulated 4 Core Power Cable with Ce ISO CCC

Specifications for 4 Core Cable :

PVC XLPE insulated power cable
1 IEC, ASTM, DIN, BS standard
2 ISO,CE,CCC certification
3 Response within 12 hours

Conductor for 4 Core Cable :

Standard and Property for Using
The XLPE insulated power cable can be produced according to our factory specification with the standard IEC60502. The factory can also design and manufacture special XLPE cable according to the other standards required by the customers. They not only have excellent electric, mechanical properties, but also have powerful resistance against chemical corrosion, heataging and environmental stress. Their structures are simple. The permissible maximum operating temperature is 90C. It is convenient for using, and they can be laid with no restriction of different elevation.

Reference Standards:IEC60502-1, IEC 60228, IEC60332 -1/2/3, BS6346, BS5467, BS6360, BS6724, VDE0276, AS/NZS 5000.1, etc.Rated Voltage:600/1000V (0.6/1kV)Core Number:Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)Available Dimensions:1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.Codes Available:NYY, NAYY, N2XY, NA2XY, NYCY, NYCWY, NYBY, NAYBY, NYRY, NAYRY, N2XRY, N2XBY, NA2XBY, NA2XRY, N2XH, NA2XH,NHMH, NHXMH,VV, VLV,YJV, YJLV, VV22, VLV22, YJV22, YJLV22, VV32, VLV32, YJV32, YJLV32, VV72, VLV72, YJV72,YJLV72Application:To be laid indoors, in tunnel, cable furrow or pipe, underground. Steel tape armored cable could bear certain mechanical force, but it can't bear great pulling force. Steel wire armored cable is applicable to the well, water inside and fall in the bad soil, it can bear great pulling strength and mechanical forces.Construction:It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.Conductor:Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed.Insulation:XLPE (Cross-linked Polyethylene) or PVC (Polyvinyl Chloride)Core Identification:1 Core: Brown
2 Cores: Brown, Blue
3 Cores: Brown, Black, Grey;
4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Alternative core identification: White Cores with Black numbersFiller:Polypropylene filament with lapped binding tapeSeparator:Binding tapeBedding:PVC (Polyvinyl Chloride) or LSZH.Armouring:Single Core: Aluminium Wire Armoured (AWA)
Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)Sheath:PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFRColour:BlackTemperature Rating:0°C to 90°C (XLPE), 0°C to 70°C (PVC)During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C (160°C for PVC)Environment temperature should be no lower than 0°C for laying the cable.Minimum Bending Radius:Single Core Cable: Non Armored Cable 20D, Armored Cable 15DCores Cable: Non Armored Cable 15D, Armored Cable 12D.Remarks: D means practical external diameter of the cableCodeConstruction 0.6/1kV (Single Core, 2C, 3C, 3C+1C, 3C+2C, 4C, 4C+1C, 5C) Low Voltage Power Cable Description