China Xc-250 Mobile Military Kitchen Trailer

Xc-250 Mobile Military Kitchen Trailer
Model XC-250 mobile field kitchen military mobile kitchen outside camping food catering trailer





,

*Inside kitchen equipments are customized according to each customer!
Main parameters
Curb weight
Minimum ground clearance
Outline size
Tread
Departure angle
Wading Depth
1900 Kg
340 mm
4200x2250x2480 /2520 mm
1895 mm
25°
500 mm
2,Main performance
(1) processed dishes for cooking, roasting and frying Western food;
(2) operated by 4 cooks, 250 dishes can be finished in 2 hours;
(3) use diesel stove;
(4) it can be used normally in the following environments:
(a) temperature: - 30-42 ºC,
(b) wind speed: below class 7 wind,
(c) climate: sunny, rainy and snowy.
1, composition
The chassis of xc250 cooking Trailer consists of suspension system, braking system, traction system, front guide wheel, support leg and other main components.
2. Usage of each department
1) suspension system
Add calcium base lubricating oil every 3000km.
2) brake system
The service braking effect depends on the adjustment of the brake clearance. You can turn the wheel by hand. Slight friction between shoe and hub is allowed;
Note: the wear of brake shoe shall not be more than 0.3mm,
3) traction system
When the cooking trailer is towed, the height of the drawbar shall be kept consistent with the height of the drawbar of the tractor, and the drawbar and the whole cooking Trailer shall be adjusted to the level to make the ground clearance between the front and back of the cooking Trailer approximately equal;
4) front guide wheel
There are two main functions of the front guide wheel: one is to support the cooking trailer when it parks, and the other is to guide the cooking trailer when it moves in non traction state.
5) support leg
When operating the support leg, open four side box doors, take out the handle from the side box door, release the movable support frame with the handle, lift the handle to pull out the movable support and put it on the fixed support. Generally, it should be placed on the position of the third gear (the position of the lowest gear), and then adjust the height of the support leg with the handle to support the body and adjust the plane of the stove.
When retracting the support legs, operate in the reverse order.
Note: before driving, the support legs must be folded up and the movable support frame must be locked and fixed with a rocker.
Two, tent
The tent is mainly composed of tent framework, roof, canopy, support, spare wheel bag and locking device. The awning bag is equipped with awning, curtain, white lining cloth, pile bag, etc.
1. Tent deployment
(1) open all the buckles at the four corner awnings;
(2) at the same time of pulling the front and rear awning frame, the front and rear awning will be automatically supported after the front and rear awning are lifted to a certain height with force;
(3) pull out the locking pin inside the left and right side awning frame, and lift the left and right side awning to a certain height with force, it will support automatically;
(4) lift the buckle belt of the canopy;
(5) unfold the left and right awning, hang the hooks on the awning on the wire ropes on the four side awning frames, fasten the buckle connecting the awning and the roof, and fasten the awning curtains;
(6) at a place of 1.5m around the cooking trailer, 18 pile hooks shall be evenly driven down, and the canopy shall be tensioned with the pull rope;
(7) spread out the lower part of the canopy and press it with soil or stone. In rainy days, the drainage ditch should also be dug;
(8) hang the curtain at the back of the cooking Trailer.
2. Tent closing
The collapse procedure is the reverse of the unfold procedure.
If the pneumatic spring loses its function, it can be temporarily replaced by the auxiliary support plate in the vehicle.
matters needing attention:
1) in any case, it is forbidden to climb the air spring by hand;
2) in case of strong wind (or air spring damage), auxiliary support shall be used to prevent the tent from sliding automatically;
3) the tent cloth shall not contact with hard objects to prevent wear and tear.
III. diesel furnace
1. Basic parameters and main performance indexes
1) fuel: use 0 x diesel oil;
2) fuel consumption: 0.5-3.0kg/h
3) working pressure: 0.1 ~ 0.3MPa
4) maximum capacity of oil tank: 8kg

Table 1 list of kitchenware, stoves and tools
CategorySerial NumberQuantityUnitPackingPlacement
Parts1Box Table2PcsFixed On The Kitchen Table2
Spare Tire1PcsFixed On The Front Hood frame3
Mfz / Abc2 Dry Powder Fire Extinguisher1Pcs
Fixed In The Left Rear Side Box Door4
Soft Water Tank3Pcs
It Shall Be Placed In The Box Type Workbench When Water Is Not Loaded And On The Tractor When Water Is Loaded5Canopy Bag1Pcs
1. The Canopy And Curtain Shall Be Separately Packed In The Canopy Packaging Bag And Then Placed In The Box Type Workbench;
Put The Hook Pile And Hammer In The Hook Pile Bag And Then In The Box Work Table6Canopy2Unit7Door Curtain2Unit8Hook Pile Bag1Pcs9Hook Pile18Pcs10Hammer1Unit11Bucket2Pcs
Placed In a Box Table12Water Tank1Set13Cooking Pot Drain Pipe2Pcs
Put It In The Main Food Pot14Inner Pot4Pcs
In a Frying Pan15Steaming Plate4Pcs16Bracket2Pcs17Seasoning Bucket2PcsStove18Fuel Tank Assembly2Pcs
Fixed In The Left Front Right Rear Box19
Oil Hose6Pcs20Burner4PcsFixed In The Hearth21
Tyre Pump2Pcs
Put It On The Designated Position Of Box Type Workbench22Ignition Rod2PcsTool23Spade1Unit24Axe1Unit25Supporting Leg Rocker4Pcs
Put It On The Four Pcs Side Door Holder26Adjustable Wrench 36 x 3001Unit
The Tools Shall Be Packed In The Tool Bag And Then Put In The Box Work Table27Adjustable Wrench 19 x 1501UnitTo9ll28Crosshead Screwdriver 100 x 51Unit
The Tools Shall Be Packed In The Tool Bag And Then Put In The Box Work Table29Slotted Screwdriver 125 x 71Unit30Cutting Pliers (200mm Long)1Unit31Oil Stone1Pcs32Fitter's Hammer 0.5kg1Unit33Double End Solid Wrench 14 x 151Pcs34Double End Solid Wrench 17 x 191Pcs35Tool Bag1PcsKitchen Utensils36Stainless Steel Scoop1UnitPut It In The Boiling Pot37A Soup Spoon2Unit38Size Colander1Unit39A Chopping Board2Pcs 40Spatula2Unit41Tin Opener1Unit42Baking Scraper1Unit43Meal Clamp1Unit44Meat Fork1Unit45Baking Tray4Pcs46Kitchen Knife Binding Bag1PcsPut The Kitchen Knife And Bone Pick Knife In The Kitchen Knife Bag And Bundle Them In The Box Work Table47Kitchen Knife2Unit48Steel Sharpener1Pcs49Paring Knife1Unit50Boning Knife1Unit51Square Plate2Pcs52Oil Sump1Pcs53Whisk1Pcs54Bread Knife1Unit 55Plastic Bag1PcsPut The Instruction Manual And Product Certificate Into The Plastic Bag And Then Put Them Into The Tool Kit56An Instruction Manual1Set57Product Certificate1Pcs58Glove2pcsPut In Box Work