High quality 30 Ton Rough Terrain Crane QRY30A with CE and Ghost Certificate
Main Features:
1. Cummins ISDE230-30 Diesel Engine (169kW)
2. Overall dimension: 12100*3180*3770 (mm)
3. Max. total rated lifting load: 30t
4. Min. rated working radius: 3m
5. Max. lifting height (Fully-extended boom+Jib): 36m
6. Max. grade ability: 55%
7. Dead weight in travel state: 27720Kg
8.Baic Boom Length is Longer than QY30A
Technical Paramters
Category
Items
Units
Parameters
Outline Dimensions
Overall length
mm
12100
Overall width
mm
3180
Overall height
mm
3770
Axle base
mm
3600
Tyre tread
mm
2560
Weight
Dead weight in travel state
Kg
27720
Power
Engine rated output
Kw/(r/min)
169/2500
Engine rated torque
N.m(r/min)
900/1400
Travel
Travel speed
Max. travel speed
Km/h
40
Turning radius
Min. turning radius
m
5.1
Min. groud clearance
mm
400
Approach angle
21
Departure angle
21
Braking distance(at 30km/h)
m
9
Max. gradeability
%
55
Max. outside noise during accelerating
dB(A)
86
Technical Lifting Parameters
Category
Items
Units
Parameters
Lifting performance
Max. total rated lifting load
t
30
Min.. rated working radius
m
3
Turning radius at swing table tail
m
3.525
Max. load moment
base boom
KN.m
1005
Fully extended boom
KN.m
546
Fully extended boom + Jib
KN.m
324
Outrigger span
Longitudinal
m
6.08
Lateral
m
6.485
Boom length
Boom
m
9.18
Fully extended boom
m
27.78
Fully extend boom+Jib
m
35.1
Jib offset angle
030
Travel
Elevating time
Boom raising time
s
75
Boom descending time
s
75
Telescoping time
Boom fully extend time
s
80
Boom fully retracting time
s
50
Max.swing speed
r/min
2.0
Outrigger telescoping time
Outrigger beam
Outrigger beam extending sychronously
s
25
Outrigger beam retracting sychronously
s
15
Outrigger jack
Outrigger jack extending sychronously
s
25
Outrigger jack retracting sychronously
s
15
(
Hoisting speed
Main winch
Full load
m/min
80
No load
m/min
85
Auxiliary winch
Full load
m/min
85
No load
m/min
90
Notes: Explanations to Lifting Load
1) The rated lifting load value given in the table is the maximum lifting capacity when the crane is set on solid and level ground. The load should not exceed 75 % of the tip-over load;
2) The total rated lifting load given in the table includes the weight of hook and slings;
3) The working radius given in the table is the actual value including the deformation amount of the boom, so lifting operation should be carried out as per working radius.
4) 75 % of the tip-over load takes into account wind force 6, i.e. lifting operation still can be carried out with fully-extended outriggers when the wind pressure reaches 125N/m2, but lifting operation with tyres or traveling with load are prohibited.