China Xgn-12 Box-Type Fixed Ring High-Voltage Switchgear

Company Introduction:
Dehler Technology Co., Ltd. specializes in producing high and low voltage switchgear, box type substation, cable branch box, outdoor vacuum circuit breaker, isolation switch, grounding switch, load switch and low voltage components and other products.
Overview
The XGN-12 Box-type Fixed Ring High-voltage Switchgear (hereinafter referred to as "SF6 ring-main cabinet" ) is an AC complete set of high voltage electrical equipment with a rated voltage of 12kV and a rated frequency of 50Hz. It is suitable for the power distribution systems of factories and mines, residential quarters, high-rise buildings, schools, parks, etc., used as the acceptor and distributor to control. It can be used for ring-main supply and terminal power supply, and also can be used as high- voltage switchgear for box-type substation.
Model Description
Structure
The SF6 ring-main cabinet is a closed structure whose basic skeleton is made by bending steel plate or aluminum-zinc steel plate. Its door and sealing plate adopts spray technology, enabling its surface to be impact-resistance and corrosion-resistance and ensuring its good-looking appearance at the same time. Its case has a protection grade of IP2X or above.
The SF6 ring-main cabinet is mainly composed by the bus compartment, switch compartment, instrument compartment, cable compartment, operating mechanism, mutual prevention devices, grounding devices and other components (its configuration structure is shown in Figure 1).

Technical Parameters
Installation base

Example of a Typical Primary Circuit Diagram
Ordering Instructions
The buyer shall provide the following information to our company:

a)The product name, model, specification, scheme (or primary connection diagram) number, quantity and delivery term.b)the name, type, specification and quantity of the main electrical components installed in the cabinet.c)The material, specifications of main bus and branch bus, or otherwise provided by the manufacturer.d)the arrangement and layout plan of the cabinet.e)The secondary circuit wiring diagram (mainly to provide relay protection requirements), terminal arrangement diagram, or otherwise provided by the manufacturer.f)Span and main dimensions when bus bridges are needed.g)The type and quantity should be presented when other supplies are required or beyond the supply of accessories, h )().
the paint color of the cabinet surface (otherwise as the standard color provided by the manufacturer).i)Other special requirements that do not match the normal use of the product.