China Xkp-560 Rubber Cracker Machine for Making Rubber Powder

XKP-560 Tire Cracker Mill/Tire Cracker/Rubber Machine
Application
The machine is to be used for raw rubber cracking and scrip rubber cracking in rubber reclaim industry.
Main structure and characteristic
1. This is a double roll rubber-mixing machine. It consists of motor, gear-down reducer, driving gears, speed-ratio gears, front and back rolls, bearings, frame, cover, bed plate, adjusting pin device, emergency stop device, roll temperature adjusting device, lubricating device and material plate, etc.
2. Front and back rolls are parallel mounted in the bearing of frame. By means of reducer, driving gears, speed ratio gears, the motor drives the front and back rolls rotate toward each other so that rubber-cracking is begun. The rolls are made from chilled cast alloy iron; The inner of it is hollow. Steam and cooling water can pass through them so that the surface temperature can be adjusted. Its surface possesses higher hardness and fineness.
3. Roller bearing, copper bushing is fixed in the bearing base of frame. Back roll bearing bases are fixed up on frame, and the front roll-bearing base can slide in the guide-rail of frame.
4. Roll spacing adjusting is carried out by means of the reverse of hand wheel makes the thread rod drive front bearing base movement. The roll pin reduces when the hand wheel rotates clockwise, otherwise it will increase.
5. The emergency stopping device is mounted in the frame. In abnormal situation, pulling the rod, via dynamic, the machine is stopped immediately.
6. Adjusting temperature device is two spray pipes with numeral rows of holes, extend the two pipes into the hollow roll, the holes are in the position of working section of the roll. The position of holes slants to 30 degree inner direction so that the spraying water and steam is directed at contacting angle of sizing material, this can control the surface temperature of roll.
Our factory is one of the big manufactures for rubber machines in China for more than 10 years. The mainly products are plate vulcanizing press, inner tube curing press, tyre retreading machine, conveypr belt vulcanizing press, rubber tile vulcanizing press, rubber kneader, two-roll mixing mill and so on. We also can design and manufacture all kinds of non-standard rubber machinery according to the requirements of the customers. We can sure the quality and give you the best reasonable price.
In the additional, our machineries have exported to America, India, Vietnam, South Africa, Iran, Australia, Sri Lanka and many other countries
If you interested in our products mentioned above. Kindly let us know by return email. Then I will supply you with further information. Meanwhile, welcome to our factory to visit and inspect.

Parameter
Version
XKP-400
XKP-450
XKP-560
XKJ400
XKJ-480
Front roll diameter
400
450
560
400
480
Back roll diameter
400
450
510
480
612
Roll length
600
650
800
650
800
Front roll surface speed
17.32
23.2
25.56
18.01
26.6
Friction ratio
1: 1.38
1: 1.38
1: 1.30
1: 1.88
1: 1.75
Max . nip
8
8
15
10
15
Feeding capacity per
200-300
600-800
-1500
-300
-500
Power
45
55
75
55
75
Size
3950*1800*1780
4770*1846*1835
5064*2284*1978
4770*2300*1835
50702800*1978
Weight
7000
12000
19000
12800
20000

tel/ :008613370896390