China Xsg Series Revolving Flash Vaporization Dryer

Drying Machine Spin Flash Dryer
Principle
The hot air enters into the bottom of the drier in tangent direction.Under the driving of the stirrer,a powerful rotatong wind field is formed.The paste state materials enter into the drier through the screw charger.Under the powerful function of the stitting vanes at high-speed roation,the materials are disteibuted under the function of strike,friction and shearing force.The block state materials will soon be smasshed and contact the hot air fully and the materials are heated and dried.The dried materials after the de-watering will go up with the heat-air flow.The step rings will stop and keep the big particles.Small particles will be sidcharged out of the drier from the of the equipment by centrifugal force function and be smashed again after they fall down to the bottom.
Features
This machine combines the whirl technology with the fluidity .ejection and smashing step technologies.
The equipment is compact and small in size ,high in production efficiency and continuous in the production .It has realized that a small equipment can perform the large production .
The drying capacity for this machine is big but its energy consumption is low .its hear efficiency can go up to more than 70%.
The materical star time is very short .The quality of the final products is very good ,The machine can be used for drying the hest sensitive materials .
For the negative pressure or the micro-negative pressure operation ,the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution .
Application
Absorbed the foreign advanced equipment and technology,our factory and Shenyang Chemical Research Institute Under the Chemical Ministry of the State have deceloped this machine.This is a new kind of drying equipment used for drying the materials,such as paste state,thixotropy,thermal senstive powder and particles.Our factory id equipped with the test sample machine,which can be used for carrying out the drying tests of various feeds for our users and for to provide the parameters to select the applicable machine.





Technical parameters
spec
Barrel diameter(mm)
Main machine dimensions(mm)
Main machine power kw
Treatmentwind capacity m 3 /h
Water evaporation quantity Kg/h
Floor space mm 2
XSG-2
200
250x2800
5-9
300-800
10-20
3500x2500
XSG-3
300
400x3300
8-15
600-1500
20-50
3800x2700
XSG-4
400
500x3500
10-17.5
1250-2500
25-70
4000x3000
XSG-5
500
600x4000
12-24
1500-4000
30-100
4200x3200
XSG-6
600
700x4200
20-29
2500-5000
40-200
4250x3250
XSG-8
800
900x4600
24-35
3000-8000
60-600
4500x3500
XSG-10
1000
1100x5000
40-62
5000-12500
100-1000
4750x3750
XSG-12
1200
1300x5200
50-89
10000-20000
150-1300
5000x4000
XSG-14
1400
1500x5400
60-105
14000-27000
200-1600
5250x4250
XSG-16
1600
1700x6000
70-105
18700-36000
250-2000
5500x4500