China Zirconia Ceramic Angular Contact Bearings 7000c

Zirconia Ceramic Angular Contact Bearings 7000C

Structure: Angular contact Ball Bearings
Type: Ball
Ceramic Ball, Ceramic Bearing
Bore Dia (d)10 mm
Outer Dia (D)26 mm
Width(B)8 mm
Dynamic Load Rating (Cr)2800
Static Load Rating (Cor)1680
Max Speed (Grease) (X1000 RPM)47
Max Speed (Oil) (X1000 RPM)70
Precision Rating: ABEC-1-9, ABEC-7, P0-P6
Seals Type: Z, ZZ, RS, 2RS, OPEN
Number of Row: Single Row
Place of Origin: SHAN DONG China (Mainland)
Material: Ceramic Si3N4
Retainer: PTFE, Nylon, PEEK
Clearance codes: C0, C2, C3, C4, C5
Vibration level codes: V4, V3, V2, V1
Noise Level: Z1, Z2, Z3, Z4
7000C Zirconia Ceramic Angular Contact Bearings can continue to operate under extremely high temperatures and are capable of operating up to 400 Deg...
7000C Zirconia Ceramic Angular Contact Bearings are capable of withstanding heavy thrust loads and moderate radial loads. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, dentistry equipment, the centrifugal forces generated by the balls will change the contact angle at the inner and outer race.
Zirconia Bearings with ceramic balls has following
Characteristics:
1) Chemical resistant. Can work in various chemicals.
2) No need lubrication, clean, and can wash in the water.
3) Non-magnetic and insulation. Reliable working.
4) Constant working in high temperature till 400 Centigrade.
5) Light weight.
6) Outstanding long time working in low temperature till -80 centigrade.
7) Tolerance is as per normal bearings. Easy for assembly.
Zirconia Bearing Application is as under:
Electro plating, electro polishing, Food processing, vacuum applications. Fiber processing, conveyor processing. Medical radiation, photo processing, Computer assembly, electronics applications, Medicine equipment, wet applications.
Contact us